1. Manuals
  2. Brands
  3. Fusion Manuals
  4. Saw
  5. MTSF236110175-0130
  6. Owner's manual

Fusion MTSF236110175-0130 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Fusion F2 Table Saw |
MTSF236110175-0130
Owner's Manual
KEEP THIS MANUAL WITH THE MACHINE
REFER TO OFTEN
USE IT TO INSTRUCT OTHERS

Advertisement

Table of Contents
loading

Summary of Contents for Fusion MTSF236110175-0130

  • Page 1 Fusion F2 Table Saw | MTSF236110175-0130 Owner’s Manual KEEP THIS MANUAL WITH THE MACHINE REFER TO OFTEN USE IT TO INSTRUCT OTHERS...
  • Page 2 F2 Table Saw Laguna takes pride in our products and stands behind them with continuing service and support for our customers. Your Laguna machine was designed to bring a new dimension of productivity to your shop. Before using your machine for the first time, learn how to use it. This manual covers a step-by-step process of assembly and machine operation. If you have any questions, this manual will provide answers.

  • Page 3: Table Of Contents

    Wiring ..................................27 Fusion F2 Table Saw (MTSF236110175-0130) ........................ 28 Parts..................................29 F2 Fence Rail..................................29 F2 Internal.................................... 30 F2 Miter Gauge & Blade Guard ............................31 F2 Table & Cabinet ................................32 Fusion F2 Table Saw Parts Table (MTSF236110175-0130) .................... 33...

  • Page 4: Warranty & Support

    F2 Table Saw Warranty & Support This machine is covered by a warranty and your dealer can answer any questions you may have. Additionally, we will always be here to offer support, service information, and product supplies and services. Laguna Tools® Customer Service LagunaTools.com 2072 Alton Parkway, Irvine, California 92606, USA...

  • Page 5: Safety

    F2 Table Saw Safety Read and understand all warnings and operation instructions before using any tool or equipment. Always follow basic safety precautions to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed.

  • Page 6: Csa Required Safety Information

    F2 Table Saw DISCONNECT UNIT before servicing. CHECK DAMAGED PARTS. Before further use of the unit, properly repair or replace any part that is damaged. CSA Required Safety Information WARNING! For Your Own Safety Read Instruction Manual before Operating Tablesaw. –...
  • Page 7 F2 Table Saw Never use the mitre gauge to feed the workpiece when ripping and do not use the rip fence as a length stop when cross cutting with the mitre gauge. Guiding the workpiece with the rip fence and the mitre gauge at the same time increases the likelihood of saw blade binding and kickback.
  • Page 8 F2 Table Saw Align the fence to be parallel with the saw blade. A misaligned fence will pinch the workpiece against the saw blade and create kickback. Use a feather-board to guide the workpiece against the table and fence when making non-through cuts such as rabbeting, dadoing or resawing cuts.
  • Page 9 F2 Table Saw Grounding Instructions Table A Ampere Rating Volts Total length of cord in feet More Than Not More Minimum gage for cord Than Not Recommended Grounding Methods Provided by CSA Group. (A) Receptacle with nominal rating less than 150 volts. (B) 150 volt receptacle without grounding pin fitted with adapter.
  • Page 10 F2 Table Saw equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.
  • Page 11 F2 Table Saw (d) AVERTISSEMENT - Utiliser un bâton-poussoir ou un bloc-poussoir au besoin. (e) AVERTISSEMENT - N'effectuez aucune opération à main levée. (f) AVERTISSEMENT - Porter une attention particulière aux instructions sur la réduction du risque de rebond. (ou "Savoir comment réduire les risques de pots-de-vin.") (g) AVERTISSEMENT - Ne jamais tendre la main autour ou au-dessus de la lame de scie.
  • Page 12 F2 Table Saw de la pièce en utilisant en même temps le guide longitudinal et le guide inclinable augmente le risque de blocage de la lame et de recul. Lors d'un sciage en long, toujours appliquer la force d'alimentation de la pièce entre le guide et la lame. Utiliser un poussoir lorsque la distance entre le guide et la lame est inférieure à...
  • Page 13 F2 Table Saw Utiliser un peigne anti-recul pour guider la pièce contre la table et le guide lors des coupes non traversantes tels que le refeuillement, l'engravure ou la refente. Un peigne anti-recul aide à contrôler la pièce en cas de recul.
  • Page 14 F2 Table Saw Veiller à ce que la scie circulaire à table soit installée de façon à tourner dans la bonne direction. Ne pas utiliser des meules, des brosses métalliques ou des disques abrasifs sur une scie circulaire à table. Une installation incorrecte de la lame ou l'utilisation d'accessoires non recommandés peut entraîner de graves blessures.

  • Page 15: Specifications

    F2 Table Saw Specifications Fusion F2 Table Saw (MTSF236110175-0130) Condensed Specs Maximum Blade Diameter ............10 in. (254 mm) Max Rip Right of Blade w/Included Fence & Rails ....37 in. (940 mm) Fence Type................Camlock T-Shape w/European Hi-Lo Face Table ..................
  • Page 16 F2 Table Saw Riving Knife Included Push Stick included Miter Gauge Included Blade Changing Tool Included Integrated Tool Storage Premium Handles Included 10 x 60T Carbide-Tipped Blade Premium Arbor and Motor Bearings Main Information Table Saw Type ................ Cabinet Maximum Blade Diameter ............10 in. (254 mm) Arbor Size ..................
  • Page 17 F2 Table Saw Miter Gauge Slot Size Width ............ 0.74 in. (19 mm) Miter Gauge Slot Size Height ........... 0.38 in. (9.8 mm) Construction Table ..................Precision-Ground Cast Iron Wings..................Precision-Ground Cast Iron Cabinet ..................Pre-Formed Steel Trunnions .................. Cast Alloy Body Assembly .................
  • Page 18 F2 Table Saw Full-Load Current Rating ............14A Minimum Circuit Size ............... 25A Connection Type ..............Cord & Plug Power Cord Included ..............Yes Power Cord Length ..............6 ft. Power Cord Gauge ..............14 AWG Plug Included ................Yes Included Plug Type ..............

  • Page 19: Setup

    F2 Table Saw Setup Fusion F1 Table Saw (MTSF132110150-0130) A. Motor Reset B. ON C. OFF D. Arbor Tilt Wheel E. Blade Guard Storage F. Riving Knife Storage G. Miter Gauge Storage H. Blade Change Tool I. Arbor Height Wheel J.
  • Page 20 F2 Table Saw A. Motor Reset B. ON C. OFF D. Arbor Tilt Wheel E. Blade Guard Storage F. Riving Knife Storage G. Miter Gauge Storage H. Blade Change Tool I. Arbor Height Wheel J. Arbor Tilt Gauge K. 4” Dust Outlet L.
  • Page 21 F2 Table Saw A. Motor Reset B. ON C. OFF D. Arbor Tilt Wheel E. Blade Guard Storage F. Riving Knife Storage G. Miter Gauge Storage H. Blade Change Tool I. Arbor Height Wheel J. Arbor Tilt Gauge K. 4” Dust Outlet L.

  • Page 22: Setup Help Sections

    F2 Table Saw Setup Help Sections Receiving It is likely that your machine will be delivered by a third party. Before unboxing, be sure to inspect the packaging and shipping documents supplied by the driver. Ensure that there is no visible damage to the shipment.

  • Page 23: Maintenance & Troubleshooting

    F2 Table Saw Maintenance & Troubleshooting Never perform and setup, maintenance or adjustment procedures with the machine connected to the power source! If you have any doubt about the described procedure, seek professional assistance. Do not attempt any procedure that you feel is unsafe, or that you do not have the physical capability of achieving. When removing banding, extreme caution must be used as the banding will spring when cut.

  • Page 24: Safety Device Alignment

    F2 Table Saw Safety Device Alignment Fig T013: Safety Device adjustments. (1) locking bolts. (2) adjustment set screws. The riving knife, blade guard, or splitter must be aligned with the blade to be used effectively. The riving knife should only be used with blades specified on the riving knife (or vice versa). To adjust the position of the blade safety attachments, relative to the saw blade: Loosen the two middle setting bolts.
  • Page 25 F2 Table Saw NOTE: The fusion 1 should not come out of square as the trunnion is bolted to the table. If the procedure results in false measurement, please check the blade and arbor nut prior to any further adjustments.
  • Page 26 F2 Table Saw 13. Test/repair/replace. Dust Collection 1. Inadequate suction 1. The optional zero clearance throat 2. No suction plate will supply better dust collection than the standard die cast throat plate. 2. move motor cover and verify that the internal hose is fixed to the blade shroud port and the external 4"...

  • Page 27: Wiring

    F2 Table Saw Wiring VOLTAGE. Before connecting this tool to a power supply (receptacle, outlet, etc.) make sure that the voltage supplied is the same that is specified on the nameplate of the tool. IF IN DOUBT, DO NOT PLUG IN THE MACHINE.

  • Page 28: Fusion F2 Table Saw (Mtsf236110175-0130)

    F2 Table Saw Fusion F2 Table Saw (MTSF236110175-0130) In order to change from 110V to 220V, a new 220V switch must be purchased and installed. With then 220V switch, wire it to the motor using the following diagram.

  • Page 29: Parts

    F2 Table Saw Parts F2 Fence Rail...

  • Page 30: F2 Internal

    F2 Table Saw F2 Internal...

  • Page 31: F2 Miter Gauge & Blade Guard

    F2 Table Saw F2 Miter Gauge & Blade Guard...

  • Page 32: F2 Table & Cabinet

    F2 Table Saw F2 Table & Cabinet...

  • Page 33: Fusion F2 Table Saw Parts Table (Mtsf236110175-0130)

    F2 Table Saw Fusion F2 Table Saw Parts Table (MTSF236110175-0130) KEY ..... PART NO... DESCRIPTION ..........SPECIFICATION ......... Q'TY 1 ....924922-000 ..Fence Assembly ........................1 1.2 ....310511-909 ..Adaptor ........................... 1 1.3 ....000002-308 ..Hex. Screw ............M6*1.0P*45 ..........1 1.4 ....
  • Page 34 F2 Table Saw 2.18....000303-110 ..Pan Head Screw ..........M5*0.8P*30 ..........1 2.19....174397-904 ..Spreader..........................1 2.20....006001-012 ..Flat Washer ............5.3*12*1.0t ..........2 3 ....924586-000 ..Miter Gauge Assy ........................1 3.1 ....230140-615 ..Handle ............................ 1 3.2 ....
  • Page 35 F2 Table Saw 37 ....002503-101 ..Round Head Socket Lock Screw ..... M5*0.8P*12 ..........8 38 ....090323-000 ..Upper Trunnion ........................1 40 ....002601-102 ..Locking CAP screw .......... M8*1.25P*20..........2 41 ....174773-000 ..Fixing Plate ..........................1 43 ....
  • Page 36 F2 Table Saw 94 ....320394-901 ..Worm Shaft ........................... 1 95 ....001902-109 ..Set screw ............M6*1.0P*6 ........... 3 96 ....012002-007 ..Key..............4*4*20 ............1 97 ....030104-001 ..Ball Bearing ............6005 ............. 1 98 ....
  • Page 37 F2 Table Saw 147 ....130397-000 ..Bushing ........................... 2 150 ....230114-906 ..Handle ............................ 2 152 ....012002-005 ..Key ..............4*4*12............2 153 ....049201-101 ..Hex Screw w/Washer ........M8*1.25P*16/(13B*6.5H) ......1 154 ....130368-903 ..Adjusting Bushing ........................1 155 ....
  • Page 38 F2 Table Saw...
  • Page 39 2072 Alton Parkway Irvine, CA 92606 U.S.A. Service: +1 (949) 474-1200 or email customerservice@lagunatools.com lagunatools.com The information contained in this publication was correct at the time of print. In the interest of continuous innovation, we reserve the right to change specifications, design or included equipment without notice or obligation.

Table of Contents