Page 2
PEM Dual Chamber membrane technology, DuPont® membrane Distilled water, purified water, RO water are all acceptable Separates and expels harmful by-products of Chlorine, Ozone and Oxides Produces the highest industry levels of molecular Hydrogen concentrates No filters or any expensive parts to replace Long electrolysis plate life Important Information: Water quality that should be used...
Warranty service Contact us at Warranty service should only be done by factory authorized distributor or repairman. info@hydrogen4health.com If your bottle needs service. Product parts diagram: Before first use: Remove silicone rubber plug from generator base. This plug is used to keep membrane wet during shipping and storage.
Connect power cord to bottle and power adapter and fully charge. The red light flashes while charging and stops flashing when charging is complete. Keep charger dry and avoid exposure to direct sunlight. Use only the charger provided to charge your bottle. Do not attempt to connect to any other device. Instructions for use:...
(Do NOT turn power on when there is no water in the bottle!) Product parameters: ≤10W Power ≤ Maximum volume 300/350/400ML Water quality demand Drinkable water Water temperature 0-60 degree C Size D67mm*H225mm (2.6” x 9”) Net weight 544G (1.2 lbs) Hydrogen concentration 1.0 -2.1 ppm ( 5 min –...
Troubleshooting: Symptom / Problem My bottle isn't making hydrogen Charge battery Check/Replace power cord Membrane may be dry. Reactivate by putting 1 inch of water in bottle and let sit for 24 hours. My bottle wont charge Replace or try a different power cord Power button blinks red 3 times and stops when May need new battery.
Need help?
Do you have a question about the PEM+ and is the answer not in the manual?
Questions and answers