Selecting A Channel ....................11 Selecting a Signal Input Mode ................. 11 Connecting to a Mobile Device................Finding the Name of FlareCON Air 2 Wi-Fi™............12 Connecting to FlareCON Air 2 Wi-Fi™ ..............12 Connecting to a DMX Controller................Controlling DMX Lights with D-Fi Hub..............
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and FlareCON Air 2 are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Page 2 of 16 FlareCON Air 2 User Manual Rev. 2...
Fastener Strap Micro USB Port DMX Adapter In OLED Display Menu Buttons To power the product ON or OFF, press and hold the <MENU> + <ENTER> buttons for 3 seconds. FlareCON Air 2 User Manual Rev. 2 Page 3 of 16...
3. Setup AC Power The FlareCON Air 2 has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The FlareCON Air 2 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.
Displays the number of the current channel <01–16> Factory Reset Resets to factory settings To power the product ON or OFF, press and hold the <MENU> + <ENTER> buttons for 3 seconds. FlareCON Air 2 User Manual Rev. 2 Page 7 of 16...
Wireless D-Fi Signals When FlareCON Air 2 is used with a mobile device it creates a wireless network (Wi-Fi™) for receiving the signals from the mobile device, and then it sends D-Fi signals wirelessly to D-Fi-compatible lights or a D-Fi Hub.
Wireless Control with DMX Products When using the FlareCON Air 2 to wirelessly send D-Fi signals while using DMX lights that have no D-Fi capability, FlareCON Air 2 must be used with a D-Fi Hub. The FlareCON Air 2 creates a wireless network (Wi-Fi™) for receiving the signals from the mobile device, and sends D-Fi signals wirelessly to the D-Fi Hub.
For DMX products, be sure to use a DMX cable to connect from DMX Out of the product transmitting the DMX signal (depending on your setup, FlareCON Air 2 or D-Fi Hub) to the DMX In of the product receiving the DMX signal.
Press <ENTER> to set the desired input mode. Connecting to a Mobile Device Connect to a mobile device only after the FlareCON Air 2 has been configured, and the FlareCON app has been installed on the mobile device. To complete the connection to your mobile devices, you will need to do the following: Find the name of FlareCON Air 2’s default Wi-Fi™.
Set FlareCON Air 2 for DMX input. See Selecting a Signal Input Mode. Connect a DMX cable from the DMX Out of the controller to the DMX In adapter of FlareCON Air 2. Configure remaining products. See Setting Up Products with FlareCON Air For information about operating the DMX controller, see the user Manual for the controller.
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. FlareCON Air 2 User Manual Rev. 2 Page 13 of 16...
D-Fi™: 400 ft (120 m) Thermal Maximum External Temperature Cooling System 104 °F (40 °C) Convection Channel Range I/O Connectors 3-XLR Ordering Product Name Item Code UPC Number FLARECONAIR2 03081588 781462219369 Page 14 of 16 FlareCON Air 2 User Manual Rev. 2...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). FlareCON Air 2 User Manual Rev. 2 Page 15 of 16...
Outside the US, U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Follow the instructions to request support or to return a product. Visit our website for contact details. Page 16 of 16 FlareCON Air 2 User Manual Rev. 2...