Airdream Vision DL 300 User Instruction

Inflatable

Advertisement

Quick Links

Inflatable Awning User Instruction
You are now the proud owner of the very latest in Inflatable awning designs.
Produced by Airdream
TM
in one of the largest awning factories in the world where
quality and design are paramount in achieving total customer satisfaction.
Airdream awnings have been developed for the modern camper who appreciates
new concepts in design technology.
Insurance
We strongly advise you to insure your awning against theft, storm or accidental
damage.

Inflatable Tubes

The awning uses Airdream inflatable tubes which have been designed to give
years of trouble free service. Each tube is protected by a zipped reinforced outer
skin. The optimal pressure advised is 7-8psi, we advise that you do not over
inflate above 8psi.

Air Pump

The Inflatable awning is supplied with a manually operated air pump specially
designed for use with Airdream Air valves. You must not use any other type of
inflator.
1/8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vision DL 300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Airdream Vision DL 300

  • Page 1 The optimal pressure advised is 7-8psi, we advise that you do not over inflate above 8psi. Air Pump The Inflatable awning is supplied with a manually operated air pump specially designed for use with Airdream Air valves. You must not use any other type of inflator.
  • Page 2 Erecting your Inflatable Awning Before you unpack your awning we strongly advise that you place a groundsheet in front of the caravan. This will avoid any soiling of the fabric or penetration by stones or twigs. Erecting the awning is a relatively simple task and we trust the following information will be of valuable assistance to the new camper.
  • Page 3 Roof support tubes: Airdream Prestige DL roof support poles 2, Airdream Vision DL 300 roof support poles 2 ; Airdream Vision DL 390 roof support poles 3 ; MotoAir roof support poles 1 Inflate the tubes supplied to a pressure of 7-8psi. You will notice that Velcro is attached on the end of each tube.
  • Page 4 Safety Climatech material is fire retardant and not fire proof. Do not cook inside the awning or use naked flames. Please read and understand the FIRE PRECAUTION LABELS THAT ARE SEWN INSIDE THE AWNING. Cleaning Tips Never use any type of detergent to clean your awning. To clean your awnings use clean water and a soft brush or cloth, never scrub the awning fabric as this could damage the coating.
  • Page 5 6. Make sure that the Inflatable Valves are properly positioned correctly and are NOT in a twisted position when the awning is in use or being packed away. × √ 7. How to set up canopy poles : Step 1, loose the buckle ( see ①) Step 2, Put canopy poles into the eyelet ( see ②) Step 3, Fasten the buckle...
  • Page 6 Failure to do this will result in your awning suffering from MILDEW AND WILL BECOME UNUASABLE. Repairs Repairs to the awning should only be made by a Airdream authorized repair agent. Warranty 12 months Items not covered under this warranty .Defects arising from neglect and misuse...
  • Page 7 Instruction for Airdream Annexes (Prestige&Vision) Remove the Awning's side panel. Zip on the annex and inflate the air tube. Secure your Annex with the ladders, pegs & guy lines provided. Attention: Prestige DL Annex has a left and right side version. The side is determined when one stands facing the awning.
  • Page 8 Roof Bar ed Peg Guy Line Pole / Pole Tape Airdream Prestige DL Airdream Vision DL 300 Airdream Vision DL 390 MotoAir Prestige DL Annex Vision DL Annex CAUTION: TO PROLONG AWNING LIFE TIME, PLEASE DRY THE AWNING COMPLETELY BEFORE REPACKING!

This manual is also suitable for:

Vision dl 390Prestige dlMotoairPrestige dl annexVision dl annex

Table of Contents