Getting Started; Set Up Xenon Portable Battery - ION Xenon PJ-150 User Manual

ION Xenon
User Guide
Chapter 2:

Getting Started

Set up Xenon portable battery

6
1
To get started with the ION Xenon
portable battery you will first unbox the
new unit.
2
Use the supplied AC/DC adapter to
charge the system to 100% before use.
You can use the USB ports while
recharging the ION Xenon portable
battery.
3
Plug the 5.5mm / 2.1mm DC jack into
the "DC IN" located on the ION Xenon
battery. Once this has been done plug
the 3 pin Australian plug into mains to
charge the ION Xenon battery.
Please note that the ION Xenon will
automatically turn on when you plug in
the DC input. This will be indicated by
the status indicator lighting up.