Page 1
M200 MASSAGE CHAIR INSTRUCTION MANUAL Please read this book thoroughly before operating the chair. Please keep this manual in a safe place for further reference.
Safety Precautions p. 5 Warning Labels Assembly p. 6 Preparing The Site p. 6 Diagram p. 6 Box Contents p. 7 M200 Assembly p. 7 p. 8 Controller Configuration Operation p. 9 p. 9 Control Symbols Used p. 10 Entertainment Maintenance p.
Specifications Type Massage Chair Model M200 Colour Black Rated Power Consumption Rated Time 15 Mins Rated Voltage AC-100~240V Rated Frequency 50/60HZ Material Plastic and Metal Upholstery Synthetic Leather Packaging Dimensions 143 cm (Length) x 77.5 cm (Width) x 73.5 cm (Height)
Safety Instructions Please pay attention to the following instructions before operating this chair. SAFETY PRECAUTIONS • The massage chair can be used amongst the whole family, please do not use the chair for any other purpose than what is intended to avoid accidents. •...
WARNING Incorrect operation may cause serious harm to the user. PROHIBITED ACTIONS Disassembly is prohibited by the user. PROHIBITED ACTIONS Do not allow children or pets to play on the massage chair. PROHIBITED ACTIONS Do not use a incorrect replacement power cord. PROHIBITED ACTIONS Do not place hands or feet into the gaps of the chair.
Assembly PREPARING SITE To find the ideal location to set up your chair, ensure that: • Area is well illuminated and well ventilated. • Surface is level. • There is enough space to access the chair. • The chair is placed in an environment with a relative humidity range of 30-50%. Please ensure the temperature is kept constant.
BOX CONTENTS Leg Rest Main Chair Manual Power Cable M200 ASSEMBLY 1. Start by removing the two silver screws from the front of the chair. 2. Connect the air pressure tube and connection wire. 3. Lift the clasps where the screws were removed from and slot the leg rest into place.
CONTROLLER CONFIGURATION Power Button Stop Button Auto Button Knead/Rock Button Knock/Tap Button Part Button Speed Button Air Button Heat Button Point Up Button Point Down Button Pose Up Button Pose Down Button...
Operation CONTROL SYMBOLS USED Press to power on or off the chair. Press during any massage program to stop ON/OFF imediately and return the chair to it’s original position. Press once to select auto program 1, the button will glow red. AUTO Press twice to select auto program 2, the button will glow green.
Turn on the Bluetooth on your device and click or tap on SEARCH DEVICE. 1. Select M200-1908-00010 and your device should now be connected to the chair. 2. Open your favourite music player and use the audio controls on your device.
Maintenance Any repairs must be carried out by a qualified engineer to ensure the smooth function of equipment. ® are not responsible for performing regular inspection for your machine. JLL shall ® ® not bear the direct or indirect losses caused by improper use of this product and third party liability.
Page 12
Keep the product away from fire. When cleaning the chair, do not use organic solvents or alkaline bleaches to avoid discolouring or cracking of the synthetic leather. When the product has not been in use for a long period of time; Turn the power switch off Make sure the power cord and hand controller are stored safe and in good condition Please store in a dry place after cleaning...
• Always seek professional advice before changing your diet or starting any exercise program. • JLL Fitness Ltd is not liable for any injuries or damages that may occur when assembling or using this massage chair. • By reading this you assume full responsibility for any injuries or changes to your physical well-being.
Need help?
Do you have a question about the M200 and is the answer not in the manual?
Questions and answers