By Shin Nagpal General Description This document describes the S-VM3000-C Coupon PCB evaluation board. The coupon PCB provides a quick and simple way of evaluating the Pulse Density Modulation (PDM) digital output microphone, VM3000. The board consists of a VM3000 bottom port MEMS microphone and a 0.1uF power supply bypass capacitor along with an edge connector.
Page 2
VM3000 Coupon PCB can be used with an Edge connector from CW Industries with part number CWR-170-10-0000 as shown in Figure 2. Supply range for Vdd is 1.6V – 3.6V. Figure 2: Connections on VM3000 Coupon PCB and Edge Connector CWR-170-10-0000 Vesper Technologies Inc. 77 Summer St, 8 floor...
Page 3
The schematic of the board and the PCB layout is shown in Figure 3 and Figure 4 respectively. Figure 3. S-VM3000-C Coupon PCB Schematic Figure 4. S-VM3000-C Coupon PCB Board Layout ( all dimensions in mm) Vesper Technologies Inc. Rev1.0...
Supply current – Low Power mode µA (CLK = 768 MHz) Supply current – Normal mode µA (CLK = 2.4 MHz) Table 2. Typical parameters for microphone operation Vesper Technologies Inc. Rev1.0 77 Summer St, 8 floor July2019 Boston, MA - 02110...
Page 5
-40 to +85 °C Storage Temperature Range -55 to +150 °C Table 3. Absolute Maximum Ratings For additional information on Vesper’s latest roadmap of microphone products, reach out to sales@vespermems.com. Vesper Technologies Inc. Rev1.0 77 Summer St, 8 floor July2019...
Need help?
Do you have a question about the S-VM3000-C and is the answer not in the manual?
Questions and answers