Customer Service And Support - David Clark DC PRO-X2 Series Quick Reference Manual

Replaceable Parts Removal/Installation
M-5B Microphone (P/N 09168P-85)
• T o remove microphone: Gently pull off foam cover. Grasp
microphone firmly and pull straight out.
• T o install microphone: Align keyway on microphone with keyway on
boom. "TALK" should be inward towards the user's face. Push until
microphone snaps into place.
Microphone Foam Cover (P/N 40062G-02)
• S lide foam cover over top of microphone and secure with
'O' ring (included).
Leatherette Ear Seals, Pair (P/N 15976P-03)
• T o remove: Gently pull off.
• T o install : Stretch earseal over lip of dome until completely seated
on dome.
®
Outlast Technology Head Pad (P/N 15977P-04)
• T o remove: Gently pull off.
• T o install : Align head pad with headband assembly and push
all around the perimeter to engage hook-and-loop fasteners.
Control Module Mounting Clip (P/N 41068G-03)
• P lace Control Module into mounting clip and snap in place.
• U se clip to attach Control Module to apparel or any convenient
location within the aircraft.

Customer Service and Support

David Clark Company aviation headsets are covered by a 5-year warranty. We make
every effort to prevent problems and the need for repairs. In the unlikely event that
you experience a problem, David Clark Company qualified representatives are avail-
able to answer your questions and provide the best customer service in the industry.
Many repairs are covered under warranty. Contact Customer Service:
Tel. 800-298-6235 • 508-751-5800 (outside the USA)
Visit our website at www.davidclark.com
A C C E S S O R I E S
WWW.DAVIDCLARK.COM 12