Catapult Features - Radial Engineering Catapult Series User Manual

®

CATAPulT feATures

3
1. INPuT: XLR-F inputs used to connect a mic, instrument or mixer to
pass the signal to the RX module.
2. THru: XLR-M thru wired in parallel with the option of mic or line-
level transformer isolation.
3. HANDle: Protective steel handle makes it easy to pick-up and drop
wherever needed.
4. lIfT: Lifts the Cat 5 cable ground path to help eliminate troublesome
ground loop noise.
5. IN/ouT: Standard Ethernet connection for shielded Cat 5 cable
depending on the model used to send/receive audio from Catapult
modules.
6. THru: Parallel connection from XLR outputs used to feed additional
Catapult modules.
7. BuMPer: Used to protect the Ethernet connectors and ground lift
switch from damage.
Radial Engineering Ltd.
2
1
4 5
1
True to the Music
6 7
Catapult™ Audio Snake