3.4
Printer Operation (Option)
Whien the printer option is installed, it can be used with the WR3320A
to recorder character data.
There are to modes for printing character data, the internal mode, in
which internal data is automatically printed, and the external mode, in
which character data from an external digital device is printed. The
internal mode is explained below. Refer to Section 4.2.1 for details
on the external mode.
There are two types of internal modes, the normal and real modes.
Normal Mode
In the nomal mode, the year, month, and day, power up time, and paper
feed speed are automatically printed.
For the power up time, the time point at which power is applied is set
to 00h, 00min, 00s, and power up time is calculated from there. If
power up time excceds 24 hours, the count returns to 00h, 00min, 00s
and starts again from there, but note that in this case, the data is not
updated.
Procedure
① Turn the power switch off, or stop paper feed.
② Set the printer mode switch to NORM OUT.
③ Set the year, month, and day data (two digits each) with the
thumbwheel switches starting from the left. The set data is
printed out as is.
EVENT Marker
TIME Marker
Fig. 3-1 Marker Printing Examples
-23-