Advertisement
Quick Links
These instructions will guide you through the setup, installation, and use of the Nitrous Outlet WinMax
Window Switch. If you have any questions about the WinMax, please call our Tech Help Line at (254)
848-4300 or email us at CustomerService@NitrousOutlet.com. We are open Monday-Friday, 8:30-
5:30CST.
Product Overview
The Nitrous Outlet WinMax Window Switch is a full featured window switch capable of controlling up
to 2 stages of Nitrous for Carb and EFI applications. The WinMax features a Gear Lockout that will
prevent your nitrous from activating for up to 3 shifts, falling or rising TPS activation, RPM activation,
RPM deactivation, a shift light, and is capable of activating a timing retard for each stage of nitrous.
Stage 1 activation light
turns on when Stage 1
is active.
'R' stands for
RPM. When in
RPM--TPS mode
or RPM only
mode it will be
displayed.
'T' stands for Throttle
Percentage. When in
RPM--TPS mode or
TPS only mode it will
be displayed.
Select options in the
programming menu.
important- All appropriate safety equipment (gloves, tools etc.) must be used during the installation of this product(s).
nitro dave's llc accepts no responsibility for injuries resulting in the installation of any product(s). nitrous oxide is for off-road use only.
winmax window switch
part number 00-61001
I N S T A L L A T I O N I N S T R U C T I O N S
Shift light turns on
when RPM is above
programmed shift
point.
305 S. 28th street Waco, TX 76710 - TEL 254-848-4300
W W W . N I T R O U S O U T L E T . C O M
Stage 2 activation light
turns on when Stage 2
is active.
Displays RPM
Displays TPS percentage
Scrolls up through
programming menu.
Scrolls down through
programming menu.
Advertisement
Summary of Contents for Nitrous Outlet WinMax 00-61001
-
Page 1: Product Overview
I N S T A L L A T I O N I N S T R U C T I O N S These instructions will guide you through the setup, installation, and use of the Nitrous Outlet WinMax Window Switch. -
Page 2: Product Installation
winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Product Installation Note: Due to the design of the window switch, external relays or solenoid drivers are required. Each output channel has a maximum current of 2 Amps. -
Page 3: Step 1: Entering Programming Mode
winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Main Screen This is the main screen of the window switch. If the win- dow switch is set to activate in TPS and RPM, it will show a ‘R’... - Page 4 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Step 2B: Menu > Config > Set Mode > RPM Selecting ‘RPM’...
- Page 5 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Menu > Stage 1 > Enable > No Pressing ‘Select’ on ‘No’ will disable Stage 1. Then press the ‘+’...
- Page 6 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Step 3E: Menu > Stage 1 > Ignition > Disable The ‘Ignition’...
- Page 7 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Menu > Stage 1 > Gear Lockouts > 2 Gear Lockouts Use the 2 Gear Lockouts setting to delay the nitrous for 2 shifts.
- Page 8 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Step 4: Menu > Stage 2 Selecting ‘Stage 2’ will take you into the setup menu for your second stage.
- Page 9 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Step 5C: Menu > TPS > TPS Type > Sensor > Set WOT With the key of the vehicle still in the run position, press the gas pedal to the floor and press ‘+’...
- Page 10 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Step 6B: Menu > RPM > Ign Type > Dist This setting is for engines with a Distributor and ignition box.
- Page 11 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Step 7: Menu > Display In this menu you can adjust the appearance of the screen.
- Page 12 winmax window switch part number 00-61001 I N S T A L L A T I O N I N S T R U C T I O N S Step 7D: Menu > Display > Stage This setting adjusts the brightness of the stage activation lights on the face of the WinMax Window Switch.