Advertisement
PRIMEX
MDE Installation Instructions
STEP 5
Measure installation position
Measure distances from edges of enclosure to outside of adjacent
studs, floor and ceiling.
STEP 7
Paint drywall and affix enclosure lid
Place paintshield, paint drywall, and install lid and frame.
Enclosure options:
Standard
FOR MORE INFORMATION CONTACT:
1.604.881.7875
1.604.881.7835
T
F
www.primex.com
452-3113
• Standard with wide lip to cover drywall cut imperfections
• Standard deep (frame extender) retrofit to add 1" more depth
• Narrow for shared stud side-by-side mounting and tight corners
• Narrow deep for shared stud, tight corners and 1" additional depth
Standard Deep
STEP 6
Measure, mark, cut and mount drywall
Use measurements from step 5 to mark out drywall. Cut out marked
area of drywall. Fit drywall over top of the installed enclosure base
and secure.
Narrow
Narrow Deep
Verge MDE
P2100, P3000, P4200, P6300
STEP 8
Finish installation
Remove paintshield and
install accessories for
equipment mounting.
Fit everything. Together.
Advertisement
