Sharp SJ-S1197E00X-EN User Manual page 11

CHAPTER -3: USING YOUR FREEZER
Accessories
Ice Tray (In some models)
• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely frozen, you can twist the tray as shown below to remove the ice cubes.
The Icematic (In some models)
• Pull the lever towards you and remove the ice maker
tray
• Fill with water to the marked level
• Hold the left end of the lever and set the ice-tray on
the icebox
• When ice cubes have formed, twist the lever to drop
the ice cubes into the icebox.
! Do not fill the icebox with water in order to make ice.
It will break.
Note:
• Do not fill the icebox with water in order to make ice.
It can be broken.
• The movement
difficult while the refrigerator is running. In such
case should be cleaned by removing the glass shelves.
Removing the icemaker
• Take out of the freezer glass shelves
• Remove the icemaker by dragging left or right on the
shelf.
You can remove the icemaker to use a larger volume of the freezer compartment.
Visual and text descriptions in the accessories section may vary according to the model of your
Cleaning
• Before cleaning your freezer, turn your mains supply off and remove the plug from the socket.
• Do not wash your freezer by pouring water on to it.
• Use a warm, soapy cloth or sponge to wipe the interior and exterior of your freezer.
• Carefully remove all baskets by sliding upwards or outwards and clean with soapy water. Do not wash in a
washing machine or dishwasher.
• Do not use solvents, abrasive cleaners, glass cleaners or all purpose cleaning agents to clean your freezer. This
may cause damage to the plastic surfaces and other components with the chemicals they contain.
• Clean the condenser at the back of your freezer at least once a year with a soft brush or vacuum cleaner.
Make sure that your freezer is unplugged while cleaning.
Replacing LED Lighting
If your fridge freezer has LED lighting contact the Sharp help desk as this should be changed by authorized personnel
only.
Defrosting
• Your appliance performs automatic defrosting. The water formed as a
result of defrosting passes through the water collection spout, flows into
the vaporisation container behind your appliance and evaporates there.
• Make sure you have disconnected the plug of your appliance before
cleaning the vaporisation container.
• Remove the vaporisation container from its position by removing the
screws as indicated. Clean it with soapy water at specific time intervals.
This will prevent odours from forming.
of the ice maker may be
appliance.
EN -9-
a