Panasonic DMR-BWT720EB Service Manual page 39

Mode name
Demonstration lock/ Ejection of the disc is prohibited.
unlock The lock setting is effective until unlocking
the tray and not released by "Main unit
initialization" of service mode.
Progressive initialization The progressive setting is initialized to
Interlace.
Item
Description
FL display
*When lock the tray.
1.
2.
3.
4.
"LOCK" is displayed for 3 seconds.
*When unlock the tray.
1.
2.
3.
4.
"UNLOCK" is displayed for 3
seconds.
*When press [OPEN/CLOSE] key
while the tray being locked.
Display "LOCK" for 3 seconds.
1.
2.
39
Key operation
Front Key
1. While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "04 PRG" is displayed on
the unit's display.
3. Press and hold [STOP] on the
remote control until "10 OCL" is
displayed on the unit's display.
4. Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
1. When the power is on, disc is in
tray, press and hold [OK], [B] and
[Y] on the remote control at the
same time for more than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2.Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "04 PRG" is displayed on
the unit's display.
3. Press and hold [STOP] on the
remote control until "10 OCL" is
displayed on the unit's display.
4. Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Press [OPEN/CLOSE] key while the
tray is being locked.
1. When the power is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
2. Repeatedly press [ ] on the
remote control or [POWER] on the
unit until "04 PRG" is displayed on
the unit's display.
3. Press and hold [OK] on the
remote control or [OPEN/CLOSE]
on the unit.