Advertisement
MVM MODIFICATION INSTRUCTIONS
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
PLEASE NOTE
The Bracketron MVM-35-05 mount is a modifi able mounting bracket. The illustrations on the left show how this mount should
look during and after the modifi cation steps in order to fi t the listed vehicles on the front page of this manual.
applications may not require any modifi cations to the mount. If this is the case it will be noted below and there will be no steps
to follow on this page.
Picture 1
Picture 2
Cut Mount Here
Picture 3
Note:
The hole pattern on the face of the MVM maybe
different then what is shown in the pictures.
© Bracketron Inc, 2007 All rights reserved.
The information in this document is subject to change without notice. Bracketron Inc. assumes no responsibility for any errors that may appear in this document nor
do we assume any liability in connection with its use. This supersedes and voids all previous literature. Please contact the sales department for additional information.
Bracketron Inc will not be responsible or liable for damage to vehicles in the installation and or removal of this Bracketron Inc mount. Bracketron Inc will not be liable
for personal injuries or damage to property resulting from a motor vehicle accident and or improper installation of this Bracketron Inc mount.
Before you start cutting or bending, your Multi Vehicle
5
Mount should look like the one to the left in picture #1.
Begin forming the Multi Vehicle Mount by cutting with
a tin snips along the solid red line. See picture #2 to
the left. This will give you a fl at surface to work with.
Smooth out with a fi le if necessary. Note: You do not
want any sharp edges.
If needed, place the Multi Vehicle Mount in a vise or on
6
any hard fl at surface. Use a small hammer to smooth
out any imperfections.
After Step 6, your bracket should look like picture #3
7
below. Use a crackle coated paint if you have dam-
aged any exposed areas.
Return to
to continue your installation.
3
Note:
Please see page 3 in this manual for PHS-
203 Ultra Slim Swivel Instructions.
Many vehicle
Bracketron Inc
5249 West 73rd Street, Suite G, Edina, MN 55439
tel:
952-746-7775
fax:
1-800-660-1784
email:
sales@bracketron.com
web:
toll free:
1-866-237-4443
www.bracketron.com
Advertisement
