Table of Contents
Advertisement
I N S TA L L AT I O N
S T E P 6
Aim Fixtures
1.
Rotate the fixture to aim the product.
2.
The product includes a geared constant-torque hinge that does not require any locking mechanism.
3.
Optional: Tighten the locking screws at the end of each fixture using a T10 torx wrench or 2mm
Hex wrench.
S T E P 7
Address Fixtures and Program Content
1.
Use Ketra's Design Studio Software to address and configure the products.
12 | G2 INSTALLATION GUIDE
770-000003-01 r09
© 2019 Ketra, Inc. All rights reserved
Advertisement
Table of Contents
