Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for SEIKAKU TECHNICAL GROUP AUDIO MATRIX RPM200
- Page 1 USER'S MANUAL AUDIO MATRIX RPM200 Paging Station...
-
Page 2: Table Of Contents
AUDIO MATRIX INDEX 01 SAFETY RELATED SYMBOLS 02 WARNING 03 IMPORTANT SAFETY INSTRUCTIONS 04 FOREWORD 05 AUDIO MATRIX 06 SYSTEM PREVIEW 07 BASIC OPERATION 08 PHYSICAL INSTALLATION 09 OPERATION 10 SOFTWARE CONTROL 11 FIRMWARE UPDATE 12 FAQ 13 SPECIFICATIONS... -
Page 3: Safety Related Symbols
AUDIO MATRIX... -
Page 4: Important Safety Instructions
AUDIO MATRIX... -
Page 5: Foreword
AUDIO MATRIX FOREWORD Thanks to purchase the product of our company, please read this manual carefully before any operation. Note: This guide contains all the information needed for the product. There might be some differences between the item and its description; please refer to the real product for the features. -
Page 6: System Preview
AUDIO MATRIX SYSTEM PREVIEW Audio Matrix is a system which combines the hardware with software. The core device is Matrix A8 or Matrix D8. The major features are listed below: 1.12 INPUTS and 12 OUTPUTS 2. In case of extension links, the maximum goes up to 192 inputs and outputs. 3.Broadcast different zones simply by paging unit control. - Page 7 AUDIO MATRIX SYSTEM PREVIEW RETAIL STORE Sales Floor RPM200 Active Speaker RVA200 MP3/CD Player Fitting Room Video Plaver MATRIX A8 Stock Room Music Server 70/100V Office 70/100V Speaker HEALTH CLUB MATRIX A8 MP3/CD Player RPM200 MATRIX A8 70/100V MP3/CD Player Locker Rooms Active Active...
- Page 8 AUDIO MATRIX SYSTEM PREVIEW RESTAURANT Restaurant RPM200 MP3/CD Player Active Satellite Video Plaver RVA200 Active MATRIX A8 Terrace Cloak Room 4CH 70/100V Toilet SCHOOL MATRIX A8 RIO200 RIO200 Active Active Speakers Speakers Video Projector Classroom Classroom...
-
Page 9: Basic Operation
AUDIO MATRIX BASIC OPERATION RPM200--Paging Station RPM200 can manage the zones you want to be broadcasted, the upper quantity is determinated by the amount of the linked server host. And you can choose the prelude as you wished (MP3 and wav are supported, less than 12M.) Zones can be selected for the ones needed or for all, it ensures the information coverage and delivering selectivity at the same time. -
Page 10: Physical Installation
AUDIO MATRIX BASIC OPERATION g. XLR connector Female 3 pin XLR connector for the gooseneck electret microphone. It uses a phantom power controlled by software. h. USB port This port is used to load MP3 files for chimes sound. The maximum time for the chimes is 4 seconds. -
Page 11: Software Control
AUDIO MATRIX OPERATION Broadcast Turn “Scroll” encoder to choose the zones intended to be paged, choose the ones by pushing “Scroll” encoder shortly and repeat until all the zones needed hooked. If all zones needed, just push “Volume” encoder once to select all. After paging zones selected, click the “Talk”... - Page 12 AUDIO MATRIX SOFTWARE CONTROL ID modification Right click on the “DeviceID” position, the function menu popped up as shown; click “Change DeviceID”, then enter the number(4 bit) you wanted in the text box, finally click OK to save and to take effect. Note: The first time to use the whole system, initial work to assign ID for each device is necessary for its functioning.
- Page 13 AUDIO MATRIX SOFTWARE CONTROL Master Volume Same as the Mic Volume, 0-32 stage can be adjusted. Priority To define the priority of the device presented, 1-8 accepted, bigger for higher priority, click “Save” button to take effect. Chime Time To define the time of Chime Sound, click upward and downward icon to adjust, 0.5 for variation, 0.5-12S accepted, click “Save”...
- Page 14 AUDIO MATRIX SOFTWARE CONTROL Attached Configuration for multiple sever host linked : Dante Control software is required for this action, please visit WWW.SEIKAKU.HK to download. After all the physical linkage confirmed, start the software and set tiks like below in the indicated area.
-
Page 15: Firmware Update
AUDIO MATRIX FIRMWARE UPDATE For more information about firmware, please visit WWW.SEIKAKU.COM. Please check the hardware version twice to identify the compatibility of firmware tended to upgrade. a. There is no sound for the system 1). Please check if the device powered on, its screen lit or not. 2). -
Page 16: Specifications
AUDIO MATRIX c. Devices can not be found 1). Please make sure devices are linked well. 2). Please make sure all devices were assigned their unique ID with MatrixSystemEditor at the initial configuration. 3). If this system using several sever hosts for extend linkage, please make sure the system were set rightly by DANTE Controller.
Need help?
Do you have a question about the AUDIO MATRIX RPM200 and is the answer not in the manual?
Questions and answers