Schematic Diagram - Panasonic SA-HT535E Service Manual

SA-HT535E / SA-HT535EG

20 Schematic Diagram

(All schematic diagrams may be modified at any time with the
development of the new technology)
Note:
S901 : PLAY switch
S902 : OPEN switch
S6000 : OPEN/CLOSE switch
S6001 : B_SKIP/ TUNE DOWN switch
S6002 : F_SKIP/ TUNE UP switch
S6003 : STOP switch
S6004 : PAUSE switch
S6005 : PLAY switch
S6011 : POWER switch
S6012 : SELECTOR switch
S6013 : RDS switch
S6014 : H_BASS switch
VR6000 : VOLUME Jog
· The voltage value and waveforms are the reference voltage
of this unit measured by DC electronic voltmeter (high
impedance) and oscilloscope on the basis of chassis.
Accordingly, there may arise some error in voltage values
and waveforms depending upon the internal impedance of
the tester or the measuring unit.
· Importance safety notice :
Components identified
characteristics important for safety. Furthermore, special
parts which have purposes of fire-retardant (resistors), high-
quality sound (capacitors), low-noise (resistors), etc. are
used. When replacing any of components, be sure to use
only manufacturer´s specified parts shown in the parts list.
Caution !
IC, LSI and VLSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during
repair.
· Cover the parts boxes made of plastics with aluminium foil.
· Put a conductive mat on the work table.
· Ground the soldering iron.
· Do not touch the pins of IC, LSI or VLSI with fingers directly.
by mark have special
56