Advertisement
10 iPump Quick Start Guide
Press
k)
l)
m)
n)
If you are satisfied with all data entered, press
your changes. Pressing either
changes) completes your RF setup and returns you to the Current
Channel screen. If all settings are correct and the red
LED remains lit, there may be a problem with the antenna, its
position, or cable connections. Consult the iPump Reference
Manual for more troubleshooting help.
7 7 7 7 To configure your iPump's decoder output,
To configure your iPump's decoder output,
To configure your iPump's decoder output,
To configure your iPump's decoder output,
navigate from the Home screen to the Decoder Setup screen as
follows:
800009-02 Rev.B
Display / Field Details
RF-MOD/FEC RATIO:
QPSK 3/4
RF modulation is QPSK.
Available forward error
correction ratios are 1/2, 2/3,
3/4, 5/6, and 7/8.
PROGRAM NUMBER:
00001
Number of program to select
from stream.
TAG SITE:
SAVE ALL CHANGES?
YES<ENT> NO<ESC>
Press ENTER to save or ESC
to cancel all RF Setup changes.
ENTER
Screen Type
User Input -
Selectable
User Input -
Editable
<Unused>
User Input -
Selectable
ENTER
or
(which cancels all
ESC
to save
ALARM
Advertisement
