Safety Precautions Always use eye and body protection when using power tools such as this grinder. Remove any jewelry or loose clothing which could become entangled in the grinding head. Set power switch to off before plugging in the grinder. Use only a properly grounded three prong 110 volt 60 cycle outlet.
Page 3
Changing Grinding Heads The Gryphon Twister is supplied with 3/4" and 1" Gryphon Slip-On Grinding Bits. To change bits, simply pull the installed bit straight up. If the new bit is the same size, drop it over the white plastic shaft adaptor.
When done, turn off the grinder. Clean grinder between uses. ® For best results, use Gryphon Grinding Bits. Gryphon offers a line of quality grinding bits. See your dealer for genuine Gryphon Grinding Bits. Visit www.gryphoncorp.com for the latest Gryphon products.
Need help?
Do you have a question about the Twister and is the answer not in the manual?
Questions and answers