Advertisement

Quick Links

INSTRUCTIONS FOR USE
8211-1030-02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XM 130 HD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MTI XM 130 HD

  • Page 1 INSTRUCTIONS FOR USE 8211-1030-02...
  • Page 2 SVENSKA D, E...
  • Page 3 SVENSKA...
  • Page 4 SVENSKA 0,7 - 0,8 mm...
  • Page 5: Safety Instructions

    ENGLISH a. The use of ride-on lawnmowers requires care 1 GENERAL and concentration. b. On slopes, it is not possible to control a This symbol indicates WARNING. Per- sliding ride-on lawnmower by braking. The sonal injury and/or damage to property main reasons for losing control are insufficient may result if the instructions are not traction, excessively high speed, insufficient...
  • Page 6 ENGLISH • Before use, always check that blades and • Watch out for holes in the ground and other mounting devices are not worn or damaged. hidden dangers. Replace worn or damage parts as a set so that • Do not drive too near ditches or high edges. the correct balance is maintained.
  • Page 7: Slope Operation

    ENGLISH a. To remove sticks and rubbish or when the 6. Do not mow in reverse unless absolutely neces- discharge has become clogged. sary. Always look down and behind before and while backing. b. To check, clean or service the machine. 7.
  • Page 8 ENGLISH DO NOT 7. Never make adjustments or repairs with the en- gine running. Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if 8. Grass catcher components are subject to wear, possible. damage, and deterioration, which could expose moving parts or allow objects to be thrown.
  • Page 9 ENGLISH 4. Connect the black cable to the battery’s 5.2.2 Closing negative terminal (-). Grasp the front edge of the engine casing and fold down the casing (fig. 3). If the cables are interchanged, the gen- erator and the battery will be damaged. The machine may not be operated un- less the engine casing is folded down.
  • Page 10: Controls And Instruments

    ENGLISH 3. From the outside, check whether no washers, 6.2 SERVICE BRAKE/CLUTCH the 0.5 mm washer, the 1.0 mm washer or both (2, Manual) washers can be inserted into the gap. The wash- A pedal that combines both service brake and er/washers must not be forced in, as there must clutch.
  • Page 11: Areas Of Use

    ENGLISH 6.6 THROTTLE/CHOKE CONTROL 6.10 CLUTCH RELEASE LEVER (9, HST) A control for setting the engine speed and to choke A lever for disengaging the variable transmission. the engine when starting from cold. Enables the machine to be moved by hand without the help of the engine.
  • Page 12: Filling The Fuel Tank

    ENGLISH With the engine running and the driver sitting on 8.2 FILLING THE FUEL TANK the seat, check as follows: Open the engine casing as above. Unscrew the fill- - select a gear, lift your weight off the seat – the er cap and fill with clean, lead-free petrol.
  • Page 13: Service And Maintenance

    ENGLISH 8.7 DRIVING TIPS 9.3 CLEANING Make sure that there is the correct quantity of oil in To reduce the risk of fire, keep the en- the engine when driving on slopes (oil level on gine, silencer, battery and fuel tank free “FULL”).
  • Page 14: Spark Plug

    ENGLISH 1. Remove the protective cover on the air filter HST: (fig. 15). The hydrostatic transmission is filled with oil (10W-40) on delivery from the factory. Unless it is 2. Dismantle the paper filter insert and the foam opened (only to be performed by a specialist), and pre-filter.
  • Page 15: Product Identity

    ENGLISH 2. The engine’s model, type and serial numbers: 10 STORAGE Found on the machine’s fan housing as illustrated: Empty the petrol tank. Start the engine and let it run until it stops. Replace the oil while the engine is still warm. Unscrew the spark plug and pour a tablespoonful of oil into the cylinder.
  • Page 16 Benzinmotoros fűnyíró Snijwijdte Kategorija Kosilnice z bencinskimi motorji Larghezza di taglio 10.Serienr Se dekal på chassit Тип 2.Typ Type 1. XM 130 HD Valmistenumero Katso tarra rungossa Tyyppi Type 2. XM 160 HD Serienr. Se mærkat på chassis Típus Type Tipo Serienr.
  • Page 17 EG-försäkran om överensstämmelse EC conformity declaration Declaração de conformidade da CE Deklaracja zgodności EC EY-vaatimustenmukaisuusvakuutus Déclaration de conformité CE Deklarace shody s EU EU-overensstemmelseserklæring Holländska EK megfelelőségi nyilatkozat EU-forsikring om overensstemmelse Dichiarazione di conformità Izjava ES o skladnosti EG-Konformitätsbescheinigung Declaración de conformidad CE Denna produkt är i överensstämmelse med Este producto respeta las siguientes normas: - direktiv 89/336/EEG om elektromagnetisk kompatibilitet...

This manual is also suitable for:

Xm 160 hd

Table of Contents