Getting to know your JUlaVIE juicer
Machine parts
Juicing bag compartment
A
70mm wide-mouthed design
Juice outlet
B
Secured with a safety valve to prevent any
potential injuries.
Juicing bag hook
C
To hooks inside the mouth of the machine used
to secure the juicing bags into place.
Juicing bag compartment cover
D
Machine will not operate until compartment cover is
fully closed and juicing bag and press are completely
closed.
On/Off switch
E
Used to power the machine on and off. Turn
off when not in use.
Handle
F
Used to move the machine easily.
Power button
G
Juicing process is started or, if needed, stopped,
with one touch of the juice drop button on the front
of the machine.
A
C
G
B
D
F
E
Step 1) Prepare the juicing filter
Locate the "juicing filter" starter kit and take out one juicing filter.
This filter is one of 2 juicing bags you will use to operate your JUlaVIE juicer.
This filter will contain your fruits and vegetables, but when pressed it allows the juice to flow
through.
Size
Inner filter
Max. Length 220mm Max. Width 190mm (Polyamide)
GETTING THE MOST OUT OF YOUR FILTER -
1.
The nylon bag is 100% recyclable and can be recycled
after each use OR for most fruits and vegetables the pulp
is squeezed dry enough that you can remove it and with
a quick rinse use again (up to 5 times, within a 12 hour
period).
2.
Fill up to the line provided on the bag to be sure that juice
does not overflow while being pressed.
Fill line
Need help?
Do you have a question about the M1 and is the answer not in the manual?