Advertisement
STEP 1
Explain procedure to subject.
Cover affected hand with
loose-fitting glove.
STEP 2
Apply Ring Rescue™ device over
the affected finger. Ensure the
device location is correct (against
the ring but not overtop).
STEP 3
Close pressure valve by
turning clockwise.
STEP 4
Pump the device until the
needle is in the light blue zone.
Quick Start Guide
STEP 5
Allow device to work for 5
minutes with hand elevated.
STEP 6
Open pressure valve by turning
counter-clockwise to release
pressure.
STEP 7
Remove device by gently wiggling
the device to free it from the
finger.
STEP 8
Remove glove and apply a
lubricant (such as Ring Slipper ).
Immediately attempt to remove
ring using techniques listed on
the backside.
PROCEDURE
5 min.
Hand
elevated
®
Advertisement
Table of Contents
Related Manuals for Ring Rescue Ring Rescue
Summary of Contents for Ring Rescue Ring Rescue
- Page 1 STEP 2 elevated Allow device to work for 5 minutes with hand elevated. STEP 6 Apply Ring Rescue™ device over the affected finger. Ensure the device location is correct (against the ring but not overtop). STEP 3 Open pressure valve by turning counter-clockwise to release pressure.
- Page 2 Or, you may work together: allow the subject to pull, twist, and rock the ring while you use the counter-traction technique. Ring Rescue Inc. 20 Orion Court, Dartmouth, NS 1 (888) 640 7464...
Need help?
Do you have a question about the Ring Rescue and is the answer not in the manual?
Questions and answers