Nordic Aluminium Global trac Htek Series Installation Instructions Manual

Installation instructions D2427e
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read All Instructions Before Installation Read All Instructions Before Installation
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS

When installing or using this track system, basic safety precautions should always be
The GLOBAL trac
When installing or using this track system, basic safety precautions should always be
When installing or using this track system, basic safety precautions should always be components and fixtures marked for use with the GLOBAL trac eco
followed, including the following :
followed, including the following :
IMPORTANT SAFETY INSTRUCTIONS
followed, including the following : system. To reduce the risk of fire and electric shock, do not use other
components as part of this system.

1. Read all of these installation instructions before installing the GLOBAL Htek 277V lighting
Track installation is only to be performed by a certified electrician in
1. Read all of these installation instructions before installing the GLOBAL Htek 277V lighting
1. Read all of these installation instructions before installing the GLOBAL Htek 277V lighting
track system
accordance with the National Electrical Code and all local codes and
Read All Instructions Before Installation Read All Instructions Before Installation
track system
track system
ordinances.
2. The GLOBAL Htek 277V track system is intended for use only with GLOBAL Htek


2. The GLOBAL Htek 277V track system is intended for use only with GLOBAL Htek Single-circuit system: The
2. The GLOBAL Htek 277V track system is intended for use only with GLOBAL Htek
The GLOBAL trac
components and fixtures marked for use with GLOBAL Htek system. To reduce risk of fire
supplied by a single 120 volt branch circuit with a maximum capacity of
components and fixtures marked for use with GLOBAL Htek system. To reduce risk of fire components and fixtures marked for use with the GLOBAL trac eco
components and fixtures marked for use with GLOBAL Htek system. To reduce risk of fire
and electric shock, do not use other components as part of this system.
20 amps.
and electric shock, do not use other components as part of this system. system. To reduce the risk of fire and electric shock, do not use other
and electric shock, do not use other components as part of this system.
Two-circuit system: The
3. Track installation is to only be performed by a certified electrician in accordance with the
components as part of this system.
3. Track installation is to only be performed by a certified electrician in accordance with the
 supplied by a balanced 120/240 volt, three-wire branch circuit with a
3. Track installation is to only be performed by a certified electrician in accordance with the
Track installation is only to be performed by a certified electrician in
National Electrical Code and all local codes and ordinances.
maximum capacity of 40 amps.
National Electrical Code and all local codes and ordinances.
National Electrical Code and all local codes and ordinances. accordance with the National Electrical Code and all local codes and

4. The GLOBAL Htek system is designed to be fed by two branch circuits rated 277VAC,
Do not use this track system with a power supply cord or convenience
ordinances.
4. The GLOBAL Htek system is designed to be fed by two branch circuits rated 277VAC,
4. The GLOBAL Htek system is designed to be fed by two branch circuits rated 277VAC,

receptacle adapter.
20A, eg. the system is a two-circuit / two-neutral track and care must be taken to keep
Single-circuit system: The

20A, eg. the system is a two-circuit / two-neutral track and care must be taken to keep
Do not install any fixtures closer than six inches from combustible
20A, eg. the system is a two-circuit / two-neutral track and care must be taken to keep
circuits designated as circuit1 and circuit2 separate.
supplied by a single 120 volt branch circuit with a maximum capacity of
materials.
circuits designated as circuit1 and circuit2 separate.
circuits designated as circuit1 and circuit2 separate.
20 amps.

5. Do not install the track in damp or wet locations.
Do not install the track in damp or wet locations.
5. Do not install the track in damp or wet locations. Two-circuit system: The

5. Do not install the track in damp or wet locations.
Do not install the track with electric power connected. Similarly,
6. Do not install any parts of the track system less than 8 ft above the floor.
supplied by a balanced 120/240 volt, three-wire branch circuit with a
6. Do not install any parts of the track system less than 8 ft above the floor.
disconnect electricity when installing or removing fixtures or components
6. Do not install any parts of the track system less than 8 ft above the floor.
maximum capacity of 40 amps.
7. Do not install any fixtures closer than six inches from combustible materials.

or changing the configuration of the track.
7. Do not install any fixtures closer than six inches from combustible materials.
Do not use this track system with a power supply cord or convenience

7. Do not install any fixtures closer than six inches from combustible materials.
Do not attach anything other than UL listed lighting fixtures marked
8. Do not use this track with a power supply cord or convenience receptacle adapter.
receptacle adapter.
8. Do not use this track with a power supply cord or convenience receptacle adapter.
 use w h Nordic Aluminium GLOBAL trac use with Nordic Aluminium GLOBAL trac
8. Do not use this track with a power supply cord or convenience receptacle adapter.
Do not install any fixtures closer than six inches from combustible
9. Do not install the track with electric power connected. Similarly, disconnect electricity
9. Do not install the track with electric power connected. Similarly, disconnect electricity
materials.
9. Do not install the track with electric power connected. Similarly, disconnect electricity
when installing or removing fixtures or components or changing the configuration of the

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
Do not install the track in damp or wet locations.
when installing or removing fixtures or components or changing the configuration of the
when installing or removing fixtures or components or changing the configuration of the

track.
Do not install the track with electric power connected. Similarly,
track.
track.
disconnect electricity when installing or removing fixtures or components
10. Do not attempt to energize anything other than Lighting Track Fixtures on the track. To
10. Do not attempt to energize anything other than Lighting Track Fixtures on the track. To
or changing the configuration of the track.
10. Do not attempt to energize anything other than Lighting Track Fixtures on the track. To
reduce the risk of fire and electrical shock, do not attempt to connect power tools,

reduce the risk of fire and electrical shock, do not attempt to connect power tools,
Do not attach anything other than UL listed lighting fixtures marked
reduce the risk of fire and electrical shock, do not attempt to connect power tools,
extension cords, appliances and the like to the track.
use w h Nordic Aluminium GLOBAL trac use with Nordic Aluminium GLOBAL trac
extension cords, appliances and the like to the track.
extension cords, appliances and the like to the track.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
GES 208 (8ft) GES 208 (8ft)
mount mount
GES 212 (12ft) GES 212 (12ft)
GES 204 (4ft GES 204 (4ft
GES 208 (8ft) GES 208 (8ft)
GET 304 (4ft) GET 304 (4ft)
mount mount
2-circuit 277V Lighting Track
GET 308 (8ft)
2-circuit 277V Lighting Track
2-circuit 277V Lighting Track
GES 212 (12ft) GES 212 (12ft)
with independent neutrals
mount mount
with independent neutrals
with independent neutrals
GET 312 (12ft) GET 312 (12ft)
GET 304 (4ft) GET 304 (4ft)
GET 308 (8ft)
mount mount
eco
GET 312 (12ft) GET 312 (12ft)
system is intended for use with GLOBAL trac
eco
system is intended for use with GLOBAL trac
h Nordic Aluminium GLOBAL trac h Nordic Aluminium GLOBAL trac
IMPORTANT
ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK
ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK
CONFIGURATION CONFIGURATION
CONFIGURATION CONFIGURATION
h Nordic Aluminium GLOBAL trac h Nordic Aluminium GLOBAL trac
IMPORTANT
ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK
CONFIGURATION CONFIGURATION CONFIGURATION CONFIGURATION
SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTRUCTIONS
one one- - circuit track, surface
series
Htek
series
Htek
series
Htek
)
one one- - circuit track, surface
two- - circuit track, surface two
two- - circuit track, surface two
eco
GES track system is designed to be
eco
GET track system is designed to be
eco
GES track system is designed to be
eco
GET track system is designed to be
eco
eco
HTEK page 1(8)
HTEK page 1(8)
HTEK page 1(8)
circuit track, surface
circuit track, surface
circuit track, surface
circuit track, surface
system only system only system only system only
to the track.
system only system only
system only system only to the track.
eco
eco
for for
for for
for for for for