Table of Contents
Advertisement
Quick Links
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect
carefully for any damage that
may have occurred during transit.
Check for loose, missing, or
damaged parts. If any damage
is observed, a shipping damage
claim must be filed with carrier.
Do not use Battery Tester if
broken, bent, cracked or damaged
parts (including labels) are noted.
Any Battery Tester that appears
damaged in any way, operates
abnormally or is missing parts
should be removed from service
immediately. If you suspect that
the Digital Battery Analyzer was
subjected to a shock load (a
load that was dropped suddenly,
unexpectedly, etc.) immediately
discontinue use until it has been
checked by a factory authorized
service center.
WARNING
The following safety information is provided as guidelines to help you operate your Digital Battery Analyzer under the safest
possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling
instructions are not known or not followed. The following safety instructions are to provide the user with the information
necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your service
system. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that uses
the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING
: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided,
may result in property damage.
Notes
: Provide clarity and helpful information.
05/15
2015 ©OEMTOOLS
DIGITAL BATTERY
ANALYZER
24369
Advertisement
Table of Contents
Summary of Contents for Oemtools 24369
- Page 1 Operating Instructions and Parts Manual 24369 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
- Page 2 Operating Instructions and Parts Manual 24369 DIGITAL BATTERY ANALYZER Thank you very much for choosing an OEMTOOLS 7. Don’t overreach. Keep proper footing and balance Product! at all times when operating this tool. 8. Check for damage. Check your tool regularly. If For future reference, please complete the owner’s...
-
Page 3: Product Specifications
Operating Instructions and Parts Manual 24369 DIGITAL BATTERY ANALYZER 22. Before use, read and understand all warnings, 29. The manufacturer declines any and all safety precautions and instructions as outlined responsibility for damage to vehicles or in the vehicle manufacturer’s service manual. It... - Page 4 Operating Instructions and Parts Manual 24369 DIGITAL BATTERY ANALYZER Figure Description Quantity Positive Battery 24368A Lead Set Clamp (Red) Negative Battery 24368B Clamp (Black) Display 24368C Lead Set 24368D Menu Button 24368E Increase Button Positive Battery 24368F Decrease Button Clamp (Red)
-
Page 5: Battery Test
Operating Instructions and Parts Manual 24369 DIGITAL BATTERY ANALYZER • IF BATTERY ACID COMES INTO CONTACT WITH Note: When disconnecting, remove clip from SKIN OR THE CLOTHES, IMMEDIATELY WASH vehicle chassis FIRST, then remove the clip from WITH SOAP AND WATER. IF THE BATTERY ACID the battery terminal. -
Page 6: Starting System Test
Operating Instructions and Parts Manual 24369 DIGITAL BATTERY ANALYZER 17. When the test is completed, the display shows the b. “CRANKING VOLTS LOW”. The cranking actual volts and the actual CCA or %. voltage is below normal limits; troubleshoot the starter with manufacturer’s recommended 18. -
Page 7: Language Select
Operating Instructions and Parts Manual 24369 DIGITAL BATTERY ANALYZER 4. When testing older model diesel engines, you may 7. Press “Enter” button to confirm selection and need to run up the engine to 2,500 RPM for 15 return to LANGUAGE SELECT display. - Page 8 OEMTOOLS™ LIMITED 90 DAY WARRANTY From 90 days from the original purchase of this product, OEMTOOLS will warranty this item. If you find any defect in material or workmanship, through normal usage, return it to the place of purchase or to OEMTOOLS for repair or replacement at our discretion.