Summary of Contents for Locosys GW-31
- Page 1 GW-31 Quick Start Guide BACKLIGHT (in the center of the screen) ADJUST/ENTER START/UP MODE/BACK RESET/DOWN GPS Function Blinking: searching for GPS Alarm status Steady on: GPS is ready Battery level Charging www.locosystech.com...
- Page 2 Touch UP or DOWN key to select time zone, then touch ADJUST key to finish the setting. Wear GW-31 to outdoor with clear sky view, then touch GPS key to enable GPS function. GW-31 will automatically set the exact date and time after the satellite icon stops blinking.
- Page 3 Use compass function To enter compass function, touch MODE key four times in the time display screen. Note: If no compass arrow shows up, please wear GW-31 to draw 8 or turn around in circles to activate compass. Enable/disable the keylock function Press START+MODE key simultaneously to enable/disable the keylock function www.locosystech.com...
- Page 4 POI, please go to www.locosystech.com to download software. Go to points of interest (POI) Touch UP or DOWN Select the item GW-31 continuously key to select the POI “GOTO” and touch updates the direction that you want to go, ENTER key to enable...
- Page 5 Touch GPS key to Touch ENTER key to To go back the same GW-31 will guide you track function. Then start recording the way, touch ENTER back from the nearest touch UP or DOWN track.
Need help?
Do you have a question about the GW-31 and is the answer not in the manual?
Questions and answers