Camera
Manage Selfview Using Touch10
Outside a call
1
In a call or outside a call (shown here),
tap Camera.
In a call
1
If you want to turn the selfview off,
while in a call, tap the Selfview avatar,
as shown.
To turn the selfview on, in a call, do as
explained above (Outside a call).
D1543002 Cisco Webex Board Room Series User Guide
Produced: September 2019 for CE9.8
All contents © 2010–2019
Cisco Systems, Inc. All rights reserved
2
Tap Selfview to turn it on.
You may now resize the selfview
image (see the following page for
more), or control the camera's pan,
tilt and zoom (see the previous page
for more).
Repeat to turn it off again.
2
Tap Turn off, as shown.
3
Tap anywhere outside the menu when
you're done.
About Editing Presets
The Selfview shows what others see
from your video system. You will
normally use it to confirm that they
see what you want them to see.
The Selfview appears as a PiP
(Picture-in-Picture), but also in full
screen (see the next page).
The position of Selfview PiP can be
changed anytime, be it in a call or
outside a call. For details on this see
two pages ahead.
44