Subscribe to Our Youtube Channel
Summary of Contents for Phoenix StatSafe Series
- Page 1 Converting StatSafe from Dell to Lonovo Tablet PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 2 WARNING! RISK OF ELECTRIC SHOCK. PLEASE CONTACT TECHNICAL SUPPORT IF YOU’RE EXPERIENCING ANY DIFFICULTY DURING THE TABLET CONVERSION. 855-633-2278 EXT: 2 PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 3 HARNESS, TERMINAL FEMALE CABLE 39 1151 HARNESS, TERMINAL MALE CABLE 41-SPN-8-25 SPANNER MACHINE SCREW 8-31 X 3/8 42-KEPS-8-10 8-32 KEPS NUT T19761A7 BACK COVER T19761A3 BEZEL, LENOVA TABLET WA-0359A BACK TABLET WELDMENT PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 4 2 Spanner Screws and the Back Cover/Clamp Weldment. 2. Remove the old tablet. 3. Remove the cords that are connected to the Docking Station. 4. Once all cords are disconnected, remove the Docking Station. PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 5 4. Locate the USB C MALE TO USB FEMALE cord. 5. Attach the USB C MALE TO USB FEMALE to the USB cord that is connected to the CABLE USB 3.0 3 HUB W/ GBE ADAPTER. PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 6 CABLE USB 3.0 3 HUB W/ GBE ADAPTER. 4. Once connected, take the CABLE USB POWER SUPPLY and place through the opening on top of the kiosk. PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 7 7. Re-install your spanner screws into the front and the back of the kiosk to lock the side panel back into place. PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 8 Converting the Power 1. Remove the elbow shaped cord connector from the Dell docking station. 2. Insert the HARNESS, TERMINAL FEMALE CABLE into the CABLE USB POWER SUPPLY. PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 9 5. Next, take the black wire and place the fork terminal under- neath the — screw on the input side. 6. Once in place, tighten the screws with your screwdriver. PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 10 11. Take the back cover and place it over all of the exposed wires, CONVERTER 50W DC-DC 5V-10A and CABLE USB 3.0 3 HUB W/ GBE ADAPTER. PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 11 ADAPTER through the opening on the back tablet weldment. Secure with KEPS NUTS. 3. Take the two cables and pull to the side so they hang off the right hand side. PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
- Page 12 BACK TABLET WELDMENT to enclose the tablet. 7. Secure FRONT BEZEL into place with spanner screws and screwdriver. Congratulations! Your conversion is complete, the Lenovo tablet is now ready for use! PHOENIX LTC | 3730 East Southern Avenue, Phoenix, Arizona 85040-3958 PHOENIXLTC.COM...
Need help?
Do you have a question about the StatSafe Series and is the answer not in the manual?
Questions and answers