Page 6
Item Description 1.Camera Lens High Definition Camera a). Hold for 3 seconds to turn camera on; Hold for 3 seconds to turn off camera 2. Power Button b). Press to enter or exit screen saver when camera is on 3.IR/White a).
Page 7
Flashing Red: camera is recording video Flashing Yellow: camera is recording audio only a). Press to scroll up in menu mode PLAY & UP KEY b). In play mode, hold to zoom out the playing image c). In play mode, press to rewind video a).
Page 8
Red blinking record status icon indicates camera is recording, Record Status white solid is standby mode. Video Recording Time Recorded time of current clip Battery Charge Current battery charge level Camera and Officer ID Assigned camera and Officer IDs Remaining Time Estimated recording hours remaining SD Card Memory Internal SD Card capacity: Free space/Total capacity...
Page 9
3. Main Menu Options To enter the setting menu: Press Menu ( ) button and then enter a password. Enter the password by using the following commands: ⚫ Press Scroll Up ( ) button to change the character to the previous letter or number.
Page 11
When on, any video you record will include some of the time that elapsed before you press the Record button (stored in the camera buffer); Pre-record Off, On When off, any video you record will include only video and audio from the point after you press the Record button.
Page 12
White Led White Led light to offer light source Off, On Laser Laser source to locate Off, On Pointer When on, camera will start recording Motion when front movement is detected Off, On Detect by the lens. When on, you will hear a voice Recording confirmation when you start Off, On...
Page 13
When on, camera will play a tone Key Tone each time you press a button. When On, Off off, tone is disabled. If password is on, user needs to Password enter password to get access to On, Off setting and connection to PC The volume of camera speaker.
Page 14
4. Operation Power on/off 1) Power on: when camera is off, press ( ) button, camera will power up and enter standby mode; ⚫ Boot up image shows up; ⚫ Working status LED indicator turns green; ⚫ Boot up music; ⚫...
Otherwise, when circumstance brightness grew up, IR LED turns off, and image becomes colorful again. 2) Manual infrared mode: When night vision is needed, PRESS IR light button to switch to Infrared mode, IR LEDs will be turned on, black and white image. PRESS this button again to turn off IR LEDs, image becomes colorful.
Audio Recording In standby mode, PRESS Audio ( ) button, with a beep and camera vibration, LED indicator turn yellow and flashes, audio recording started. PRESS Audio ( ) button again to stop audio recording. One Button recording When camera is powered off, HOLD Record ( ) button, camera will initiate and start video recording immediately.
Page 17
password(default password is 000000), the camera will be recognized by the computer as Extra drive. User can go to camera folder and delete those files not needed. 5.14 Playback 1) In playback mode, PRESS OK ( ) to pause/resume playback; PRESS Scroll-Up ( ) button to rewind, PRESS Scroll-down ( ) button to fast...
Page 18
⚫ A USB port on your computer (powered on) ⚫ The included USB power adapter (connect to a power outlet) ⚫ The included car charger. 2). Attach camera to the docking bay. Use a USB cable to connect the docking bay to one of the following: ⚫...
Page 19
GPS Player Google Earth Run GPS player and Google Earth. Open the video (with GPS tags) footage by the GPS player.
Page 20
PS: you could choose related maps in your region. Click “Google Earth” icon to review GPS route on Google Earth program. (PS: make sure Google Earth program is working in your PC.)
Need help?
Do you have a question about the EH150 and is the answer not in the manual?
Questions and answers