Advertisement
Quick Links
Advertisement
Summary of Contents for DC Pedals 5-Channel Bluetooth Looper
- Page 1 User Manual...
- Page 2 – User Manual DC Pedals™ 5-Channel Bluetooth Looper Our 5-Channel Bluetooth Looper is a microcontroller controlled programmable looper effects true-bypass switching system with five loops, 100 direct accessible presets, 100 MIDI accessible presets, MIDI input and MIDI output, and our patented Bluetooth wireless programming and control. Use your iOS or Android mobile device and our VirtualLooper™...
-
Page 3: Mode Switch
Save Mode. See the Programming section to learn how to create and save presets. When switching between Live and Preset modes, the looper retains the current state of the loops and just changes ©2019 DC Pedals. All Rights Reserved. r3.1 Page 3 of 12... - Page 4 Then with a quick press of the Mode switch and a Channel switch and you are right back into the preset. This one-button Live Mode feature is available only in DC Pedals designed loopers. Bank Switch: The Bank switch is active in both Live and Preset Modes but behaves differently in each mode.
- Page 5 The looper responds to MIDI PC messages from other devices. Any MIDI PC message received on the MIDI Input Channel with a preset value of 0 through 99 will recall the corresponding looper preset (1-100). The ©2019 DC Pedals. All Rights Reserved. r3.1 Page 5 of 12...
- Page 6 Mode. While in Configuration Mode, the Mode LED indicates the active configuration page. There are five configuration pages. Press the Mode switch to cycle through the five configuration pages. ©2019 DC Pedals. All Rights Reserved. r3.1 Page 6 of 12...
- Page 7 ON = MIDI PC message will be sent Channel LED 5 OFF = MIDI PC will NOT be sent Channel SW 5 Toggles MIDI PC Flag for this preset ©2019 DC Pedals. All Rights Reserved. r3.1 Page 7 of 12 www.dcpedals.com...
- Page 8 Toggles MIDI Through MIDI CC Receive Flag ON = MIDI CC receive enabled Channel LED 5 OFF = MIDI CC receive disabled Channel SW 5 Toggles MIDI CC Receive Flag ©2019 DC Pedals. All Rights Reserved. r3.1 Page 8 of 12 www.dcpedals.com...
- Page 9 Channel SW 3 Toggles Loop 3 Channel LED 4 Loop 4 Channel SW 4 Toggles Loop 4 Channel LED 5 Loop 5 Channel SW 5 Toggles Loop 5 ©2019 DC Pedals. All Rights Reserved. r3.1 Page 9 of 12 www.dcpedals.com...
- Page 10 Channel SW 1 Toggles bit 1 Channel SW 2 Toggles bit 2 Channel SW 3 Toggles bit 3 Channel SW 4 Toggles bit 4 Channel SW 5 No action ©2019 DC Pedals. All Rights Reserved. r3.1 Page 10 of 12 www.dcpedals.com...
- Page 11 Channel SW 1 Toggles bit 1 Channel SW 2 Toggles bit 2 Channel SW 3 Toggles bit 3 Channel SW 4 Toggles bit 4 Channel SW 5 No action ©2019 DC Pedals. All Rights Reserved. r3.1 Page 11 of 12 www.dcpedals.com...
-
Page 12: Factory Reset
MIDI PC settings. The looper will automatically restart with factory settings. To cancel the factory reset, remove power and restart the looper normally. DC Pedals is located in Florida and can be reached at www.dcpedals.com. All DC Pedals products are designed and manufactured in the USA! Thanks for your business.
Need help?
Do you have a question about the 5-Channel Bluetooth Looper and is the answer not in the manual?
Questions and answers