Advertisement
Advertisement
Table of Contents
Summary of Contents for OMCR B01.13 Series
- Page 1 Via Quarantelli 8 -10077 - S. Maurizio C.se - Italy T +39 011 996 46 11 - F +39 011 996 46 46 C.F./P.IVA 07677130010 info@omcr.it - www.omcr.it Use and maintenance manual complete of EC conformity declaration LIFTING BRACKET Article numbers: B01.13 www.omcr.it...
- Page 2 INDEX Risks Evaluation page 3 Symbols and warnings classification page 3 page 4 Handling and storage page 8 Maintenance page 9 EC conformity declaration page 10 2. Use and maintenance manual B01.13 www.omcr.it San Maurizio C.se - 23/11/2018...
-
Page 3: Risks Evaluation
The lifting brackets have to be used as couplets for ropes and chains and they allow users to make on safety the following actions: LIFTING, HANDLING; the material, the production and the quality-check of all OMCR lifting pins comply with the Directive 2006/42/EC requirements; all OMCR lifting elements have been tested with a static safety factor even to a minimum 1.5, all materials have been analyzed according to UNI EN 10204,... - Page 4 0.84 β 50°< ≤60° 0.65 G = Die load center β = Rope angle from vertical β NOTE: lifting with >60° is not provided DIE AXIS DIE AXIS 4. Use and maintenance manual B01.13 www.omcr.it San Maurizio C.se - 23/11/2018...
- Page 5 The missing respect of the prescriptions included in this manual may cause the accidental fall of the load. 3.2.2 WARNING Pic.1 The die overturning is not allowed (see Pic.1 5. Use and maintenance manual B01.13 www.omcr.it San Maurizio C.se - 23/11/2018...
- Page 6 At the moment of the use, check the correct screws clamping; in the following table are written down screws and clamping couples for the fixing of the lifting brackets; it is required to use threadlocker LOCTITE 243 or lock washers. SCREW DIN 912 CLAMPING COUPLE OMCR CODE FIBRO CODE SCREW NR. CL. 8.8 [Nm] B01.13.32...
-
Page 7: Maintenance
Don’t make lifting/handling with slings that have an angle of over 90° to the horizontal level, Pic.4 in opposed case can happen the extraction of the pin with the risk of load fall (see Pic.4 7. Use and maintenance manual B01.13 www.omcr.it San Maurizio C.se - 23/11/2018... -
Page 8: Handling And Storage
In case of accidental release of the load there may be risks of injury. Pic.5 4. HANDLING AND STORAGE WARNING In the following table are written OMCR B01.13. lifting brackets weights; the lifting brackets must be handled in compliance with the current norms concerning the movement by hand of the loads. OMCR CODE... - Page 9 9. Use and maintenance manual B01.13 www.omcr.it San Maurizio C.se - 23/11/2018...
-
Page 10: Ec Conformity Declaration
C.F./P.IVA 07677130010 info@omcr.it - www.omcr.it EC CONFORMITY DECLARATION (Directive 2006/42/CE) OMCR S.r.l. seated in Via Quarantelli, 8 – 10077 S.Maurizio C.se – (Torino-Italy) through its legal representative manager, declares that: LIFTING BRACKET Article code: B01.13. Have a work order number indelibly marked on every...