Step 1 – Charge Your Spy Pen; Step 2 – Insert The Micro Sd Memory Card (Chip) - Sherlock Hones Spy Pen Instruction & Tips

STEP 1 – Charge Your Spy Pen (See diagram)
● First time only, charge 3 hours. Thereafter, it's much less time.
● Plug USB cable into pen and other end into your computer.
● Your spy pen's light will blink while charging and turn solid when fully charged.
● A full charge should accommodate about 1.5 hours of recording time.
STEP 2 – Insert the Micro SD Memory Card (Chip) (Included)
● Gently, yet firmly slide the micro SD card chip into your spy pen slot.
● You should feel resistance when the chip is fully inserted/seated in the pen.
● Approximately 1/8" of the micro SD card chip will be visible when it's inserted correctly.
TIPS AND TRICKS
● Ensure the micro SD card is pushed in completely; otherwise, the status light will blink
red repeatedly and your spy pen will not work.
● The spy pen has the capacity to handle 2GB ­ 4GB ­ 8GB ­ 16GB chip.
● The rechargeable lithium battery can accommodate approximately 1.5 hours of recording
time for both videos and photos, before recharging is necessary.