Page 1
FUSEFORCE ® Hand Fixation System SURGIC A L T ECHNIQUE...
Page 2
Package inserts are also available by contacting Wright Medical Technology, Inc. Contact information can be found on the back of this surgical technique, and the package insert is available at www.wmt.com.
Intended Use Indications The FUSEFORCE® Implant System is intended to be used for fracture and osteotomy fixation and joint arthrodesis of the hand and foot. Contraindications General contraindications for the use of these implants for joint reconstruction, osteotomy or fusion include: »...
Page 4
Technique Preparation Determine the correct Implant size by using a standard ruler or tape measure. Open the matching size FUSEFORCE® Implant Kit with its corresponding Inserter, Reamer, Reamer Guide and Locator Pin. Procedure While maintaining desired reduction, place Reamer Guide across the fusion site with both guides touching bone.
Page 5
Reamer. Remove the Reamer, Locator Pin and Reamer Guide. Remove the Inserter / Implant assembly from the sterile Kit. | Figure 3 | Figure 3 While maintaining reduction, align and insert the tips of the FUSEFORCE® into the drilled holes. | Figure 4 | Figure 4 Tamp the FUSEFORCE®...
Page 6
Twist the plastic Inserter counter- clockwise (as shown by arrows on top) to release the Implant. Place the end of the Inserter on the implant and apply pressure, manually or using a mallet, to fully seat the FUSEFORCE® Implant. Chapter 1...
Page 7
Ordering Information FUSEFORCE® Hand Fixation System Description Bridge Reamer ALT P/N* Width A Length B Size FFNS0808 FFS-0808 FUSEFORCE® FFNS1010 FFS-1010 FUSEFORCE® FFNS1012 FFS-1012 FUSEFORCE® FFNS1212 FFS-1212 FUSEFORCE® FFNS1515 FFS-1515 FUSEFORCE® FFNS1816 FFS-1816 FUSEFORCE® FFNS2020 FFS-2020 FUSEFORCE® FFNS2522 FFS-2522 FUSEFORCE®...
Need help?
Do you have a question about the FUSEFORCE and is the answer not in the manual?
Questions and answers