Lightcloud is a wireless lighting Lightcloud is a wireless lighting control service. The Lightcloud control service. The Lightcloud Touch is a wall-mounted 10" Touch is a wall-mounted 10" touchscreen tablet that gives touchscreen tablet that gives users a convenient and...
Contents Specifications Lightcloud Touch Instruction Manual PART NUMBER LCTOUCH INPUT 90-264VAC, 0.3-0.5A, 47-63Hz OPERATING TEMPERATURE 0°C to 40°C ® MAXIMUM RELATIVE HUMIDITY OVERALL DIMENSIONS Four #6-32 x 3/8” Bracket 10.8” x 7.5” x 0.7” One #4-40 x 1/8” acting as a screw set...
What you need Lightcloud Gateway A Lightcloud installation requires A Lightcloud installation requires at least one Lightcloud Gateway to at least one Lightcloud Gateway to manage your devices. manage your devices. Lightcloud Controller (Or similar Lightcloud actuation device) WE ’ RE HERE TO HELP:...
Finding a Wiring suitable location Lightcloud uses a wireless mesh network to connect devices such as the Touch to the Gateway. Unlike a WiFi router, each Lightcloud device may connect another device to the network. If there BLACK / HOT...
Setup & installation (cont’d) Wire the Power Supply Remove the Bracket Black to Hot Pull the tab at the top of the Touch White to Neutral and slide the bracket off the Touch. Green to Ground BLACK / HOT WHITE /...
Setup & installation (cont’d) Install the Bracket Connect power cable to Touch Connect the power cable to the Center the bracket over the back of the Touch junction box and attach with screws.
Setup & installation (cont’d) Tighten Set Screw Slide Touch onto Bracket Tighten set screw on top of bracket Align bracket tabs with slots on back of Touch and slide Touch down. Don’t over tighten set screw!
Page 10
Andriod DE VICE IDs Scan & Install Lightcloud Devices: Scan each device and assign to a room. It’s recommended that each device is scanned just before or just after being wired so no devices are missed. The more notes that are given, the easier it is to commission the system.
Page 11
Setup & installation (cont’d) Power Up Call RAB at 1 (844) LIGHTCLOUD, or email us at support@lightcloud.com, to add the Touch to your Lightcloud network. ®...
Page 12
Once the Touch has joined your network, you'll see the screen below. ®...
Page 13
Functionality Configure All Lightcloud products can be commissioned and configured by: • Logging on to lightcloud.com • Calling RAB at 1 (844) LIGHTCLOUD • Emailing us at support@lightcloud.com Configuring the Touch by calling or emailing RAB 1 (844) LIGHTCLOUD 1 (844) 544-4825...
Page 14
Configuring the Touch using the web/mobile application 2a 2a Navigate to https://control.lightcloud.com and log in.
Page 15
Functionality (cont’d) Configuring the Touch using the web/mobile application (cont’d) 2b 2b Click the menu icon in the top left.
Page 16
Navigate to your Site, then click Devices. Find your Touch device in the Device List on the left.
Page 17
Functionality (cont’d) Configuring the Touch using the web/mobile application (cont’d) Click the icon to add zone and/or In this example, we've configured our scene controls to your Touch. Touch to control two zones and one scene:...
Page 18
2f 2f Within a few seconds, the tablet UI refreshes to reflect the changes.
Page 19
FCC Information: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Need help?
Do you have a question about the Touch and is the answer not in the manual?
Questions and answers