Wiring - Wahl James Martin ZX595 Manual

James Martin Mini Grinder

WIRING

WARNING: IF THE SUPPLY CORD IS DAMAGED IT MUST BE REPLACED BY THE
MANUFACTURERS SERVICE AGENT OR A SIMILARLY QUALIFIED PERSON IN ORDER TO
AVOID A HAZARD.
The wires in the mains lead of this Mini Grinder are coloured in accordance to the following
code:
Blue Neutral (N) Brown live (L)
This appliance is fitted with a 3 pin plug which has a 3 amp fuse fitted.
If the plug supplied is not suitable for your socket or becomes damaged, it should be cut off and
disposed of, and a suitable plug fitted as detailed below.
As the colours of the wires in the mains lead of this Mini Grinder may not correspond with the
colour markings identifying the terminals in your plug, proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked
with the letter 'N' or coloured BLACK or BLUE.
The wire which is coloured BROWN must be connected to the terminal in the plug which is
marked with the letter 'L' or coloured RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is marked with the letter 'E' or has
the Earth symbol, or coloured GREEN or GREEN/YELLOW.
11