Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for AC Infinity ARKTICA Series
- Page 1 ARKTICA SERIES EQUIPMENT RACK CABINETS USER MANUAL USER MANUAL...
- Page 3 WELCOME Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information. EMAIL LOCATION support@acinfinity.com...
- Page 4 MANUAL CODE AR1902X1 PRODUCT MODEL UPC-A ARKTICA T6 Wall Mount AC-ARK6-TW 819137020740 ARKTICA T9 Wall Mount AC-ARK9-TW 819137020757 ARKTICA T12 Wall Mount AC-ARK12-TW 819137020788 ARKTICA T12 With Casters AC-ARK12-TC 819137020771...
-
Page 5: Table Of Contents
................. Page 5 Key Features ................. Page 6 Product Contents ................Page 7 Assembly ..................Page 8 Mounting ..................Page 11 Powering ..................Page 13 Programming ................. Page 15 Other AC Infinity Products ............. Page 20 Warranty ..................Page 21... -
Page 6: Key Features
KEY FEATURES SMART CONTROLLER HEAVY-DUTY BUILD QUIET COOLING LCD display enables temp, Thick Cold-rolled steel The internal fan system monitoring, automated construction ensures the rack features a PWM-controlled triggers, speed control, timer, protects mounted equipment motor with dual-ball bearings alarms, and energy mode. and can hold up to 200 lbs. -
Page 7: Product Contents
PRODUCT CONTENTS ARKTICA SERIES - EQUIPMENT RACK CABINETS Included In Standing And Wall Mount Models THERMAL RACK POWER LOCKABLE UNIT ADAPTER PROBE WHEELS (x1) (x1) (x1) (x4) MOUNTING DOOR WHEEL 10-32 MOUNT- KEYS SCREWS ING SCREWS (x1) (x2) (x16) (x50) (Wall-mount screws for the brackets are not included. -
Page 8: Assembly
ASSEMBLY STEP 1 For standing rack models attach the wheels to the rack system by carefully laying down the rack onto a piece of cardboard or carpet to avoid any damage or scratches. Simply screw on the wheels using the included hardware. STEP 2 The rack includes three slots, one located on the top and one in the back and another... - Page 9 ASSEMBLY STEP 3 Every door on the rack is removable, if needed you can remove the doors by pushing down the pin hinge on thats on the inside corner. Tilt the door out so the top hinge is outside the hole, and then pull up so the bottom hinge comes off the rack.
- Page 10 ASSEMBLY STEP 5 Each door is lockable with the included key set. Make sure the door is completley closed before locking, keep keys in a secure location. STEP 6 To open each door, push in the key hole area that says PUSH. The door handle will extend out, and can be rotated to the left to open the door.
-
Page 11: Mounting
MOUNTING STEP 1 If you are mounting your rack against the wall, check the wall area for a stud location. The mounting holes must go through a stud support. Lay the mounting bar flat side against the wall. Using the included mounting bar to mark the hole locations. - Page 12 MOUNTING STEP 3 Using the included mounting anchors, place them inside the holes you previously made and secure the mounting bar. NOTE: Wall Mounting screws are not included. STEP 4 Carefully lift the rack with assistance up against the mounted bar, in the back of the rack there are hollow holes that will hang on like a picture frame.
-
Page 13: Powering
POWERING STEP 1 To attach the fan locate the usb cord coming from the top fan and plug it in to the back of the controller's plug named EXT. This USB fan cord may already be plugged into the controller for you. - Page 14 POWERING STEP 3 To power the rack's fan and controller, connect the DC connector of the power adapter into the POWER port located on the backside on the controller. Then plug the power adapter into a standard outlet. Inside View STEP 4 To mount rack mount equipment, use a screw- driver to install the included cage nuts onto the...
-
Page 15: Programming
PROGRAMMING 1. MODE BUTTON 3. UP / DOWN BUTTON 2. LEAF BUTTON This button cycles through The up and down buttons This turns the display off each of the controller's adjusts the settings of the while programs run in the modes: ON, OFF, TIMER, mode that you are in. - Page 16 PROGRAMMING MODE SETTING Press the Mode button to cycle through the controller’s available programming modes and settings: ON Mode, OFF Mode, TIMER Mode, AUTO Mode (1 trigger), ALARM Settings (1 setting). ON MODE In this mode, the fans will run continuously regardless of temperature.
- Page 17 PROGRAMMING AUTO MODE: HIGH TEMP. In this mode, press the up or down button to set a high temperature trigger. The fans will activate if the probe’s measured temperature exceeds the temperature you have set in this mode. The activated fans will slowly increase in speed until it reaches the speed set in ON Mode.
- Page 18 PROGRAMMING FAHRENHEIT OR CELSIUS To change to displayed units between Fahrenheit and Celsius, please set the controller to OFF Mode, then hold the up button for Fahrenheit (°F) or hold the down button for Celsius (°C). DISPLAY BRIGHTNESS To adjust the brightness of the display, please set the controller to OFF Mode, then press the up or down button to increase or decrease the brightness level.
- Page 19 PROGRAMMING ALERT ICONS On the top left of the display is the alert icon section. Icons may flash when the controller wishes to alert you that a particular function or alarm is being triggered. DISPLAY LOCK ALERT This icon is visible when the controller has been locked. The icon will flash to alert you that the controller is locked if you try to change the mode or settings.
-
Page 20: Other Ac Infinity Products
Rack Drawers The AC Infinity aluminum rack mount drawer is designed to be mounted into standard 19-inch racks to provide storage space. The drawer can securely hold various rack equipment. -
Page 21: Warranty
WARRANTY This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues. - Page 22 No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
- Page 24 www.acinfinity.com...
Need help?
Do you have a question about the ARKTICA Series and is the answer not in the manual?
Questions and answers