Subscribe to Our Youtube Channel
Related Manuals for mothercare Indicator
Summary of Contents for mothercare Indicator
- Page 1 Read the instructions carefully before use and keep them for future reference. Your child may be hurt if you do not follow the instructions.
- Page 2 introduction This table mounting seat allows your child to sit with you when using a table, by securing onto the edge of the table* and features coloured pressure indicators to show when the seat is sufficiently tight on the table. Suitable for children who can sit unaided (around six to nine months) to 15 kg.
- Page 3 preparation for use frame assembly fig 2 Lay the frame and clamp arms out as shown in fig 1, noting the position of the slots in the clamp arms. Press the silver button under the left side of the seat frame then slide the left clamp arm (fig 1c) on to the tube.
- Page 4 ( 18mm (3/4”) to 50mm (2”)) that the indicator table seat will be fitted to. fig 7 Slide the indicator table seat on to the table until the edge of the table is touching the vertical tubes as shown.
- Page 5 preparation for use fig 8 Screw both clamps upwards until they contact the underside of the table. Check that the seat has not moved, then continue tightening the clamps until the pressure indicators show only green in the windows on the knobs, as indicated left.
- Page 6 If the indicator table seat is left secured to a table for a prolonged period, it might leave marks on the table surface. It is advisable to remove the seat from the table when not in use.
Need help?
Do you have a question about the Indicator and is the answer not in the manual?
Questions and answers