Table of Contents Keypad Layout ............................- 1 - Arming via the Keypad ..........................- 2 - Disarming via the Keypad ......................... - 4 - User Notes ..............................- 5 - Support ..............................- 6 -...
Keypad Layout CLEAR – Logs user off of the keypad or will ENTER – Acknowledge action, clear alarm refresh the DISPLAY. memory or move to the next screen. BYPASS – Ignores a particular zone when SCROLL PADS – Use for browsing options in arming for this instance.
Arming via the Keypad 1. If the system/area you are in is disarmed, the DISPLAY will state [Area Name] is DISARMED and the disarm icon will be green. 2. Use the NUMPAD to enter in your PIN code then press ENTER. If the login is accepted a greeting will be displayed before it returns to the main menu.
Page 5
3. Press the ARM key to begin the arming process. It will be checking the zones for faults or if any are tripped. 4. Once the check is complete it will begin the Exit Delay. You’ll then have a limited time to exit the area. The default sending is 45 seconds but this can be changed to your preference.
Disarming via the Keypad 1. When you trip a zone (opening a monitored door, walking in front of a monitored motion, etc.) Will go into the Entry Delay by default you have 30 seconds to disarm the system. 2. To disarm the system, enter your PIN and press ENTER.