Advertisement
Available languages
Available languages
User manual / Bedienungsanleitung
Speed Light
If you use the
completely independent of the power line or frequency of your country. As well, the 300Hz calibrated
light, used as an external light source is completely independent from possible power line fluctuations,
which could influence the result by regular light. The 300Hz of the
stabilized quartz oscillator and permit a very exact adjustment.
Stroboscope Testrecord
1. Please put the
2. To adjust the optimal speed for the turntable with the
1.97 – 3.94 inch (5 – 10 cm) over the
ca. 5-10 cm
Pic. 1: Distance between
3. When the black lines stop in the blue light and do not move visible, you have the optimal speed.
(33 1/3rpm outside stribe, 45rpm inside stribe) (picture 1)
- If the lines move clockwise, the speed is too fast.
- If the lines move anti-clockwise, the speed is too slow.
4. For the optimal speed adjustment we recommend our Smart Syncro (Art.No. EL024), so you can
exactly adjust the speed on the Hz.
5. If the intensity of the light reduces, please change the battery. Use the exact battery type:
V23GA – 12V - Alkaline
4
-Usage of the
(AC039) you can reach an even higher or more accurate adjustment,
on your turntable.
Stroboscope Testrecord
Speed Light
Stroboscope Testrecord
and
Speed Light
-
Speed Light
Speed Light
, hold the
(picture 1).
© clearaudio electronic GmbH, 2018/12
are generated by a
Speed Light
about
Advertisement
