Contents Quick Start Guide Legends Safety Instructions Product Package Contents Basic Requirements System Overview Chassis Mounting System Connections Disk Loading Power Up Sequence Front Panel Menu COLDSTORE Set up and Maintenance Software - SITESCAPE Installing SITESCAPE Getting Connected System Configuration Disk Management –...
, SFS , DISKPLAY , TRINITY and the Veracity company logo are Trademarks or Registered Trademarks of Veracity UK Ltd. Other trademarks referred to in this guide belong to their respective owners. COLDSTORE is covered by the following patents: US Patent No.
This makes the unit easier and safer to handle. If the unit is to be used free-standing, we recommend fitting the base feet to avoid damaging supporting surfaces with the metal case. REV 3.0.3 | October 2018 | 4 VERACITY COLDSTORE | CSTORE15-3U QUICK START GUIDE |...
If the system has been switched on in error, simply switch the unit off before proceeding. Note that further disks can be added later while the system is running. REV 3.0.3 | October 2018 | 5 VERACITY COLDSTORE | CSTORE15-3U QUICK START GUIDE |...
ON to indicate drive presence and flash when there is a disk fault. A flashing LED also indicates it is safe to remove the drive. Seek technical help from your supplier or from Veracity’s technical support team. ...
See the COLDSTORE User’s Guide for full details of the front panel menu system and control. K) COLDSTORE Set up and Maintenance Software - SITESCAPE SITESCAPE is a software application which works with all configurable Veracity network devices. For COLDSTORE, SITESCAPE can be used to set up, apply firmware upgrades, obtain status and view diagnostics.
IP address of the COLDSTORE but matches the subnet and gateway addresses. Using the Windows Start Menu, navigate to All Apps>Veracity. Click SITESCAPE. If Window User Account Control is enabled, click Yes when prompted.
Page 9
This is either the default IP address, or the IP address read from the LCD display of the COLDSTORE. Click Add. The Add device manually dialog closes and the Discovery window updates to show a Manual tab. REV 3.0.3 | October 2018 | 9 VERACITY COLDSTORE | CSTORE15-3U QUICK START GUIDE |...
Page 10
COLDSTORE entry. Typical issues are that the device has not been found or the credentials are invalid. Retrace previous steps to correct the issue. REV 3.0.3 | October 2018 | 10 VERACITY COLDSTORE | CSTORE15-3U QUICK START GUIDE |...
Correct time-sync may be essential for correct operation, depending upon application. It is strongly recommended that a master NTP time server system be added to the network. Veracity’s TIMENET PRO is a suitable hardware device – see www.veracityglobal.com for full details.
Page 12
Click OK to confirm the changes made, or Cancel to abandon the changes made. If OK was clicked, a confirmation banner will be displayed indicating that the changes have been REV 3.0.3 | October 2018 | 12 VERACITY COLDSTORE | CSTORE15-3U QUICK START GUIDE |...
The green LEDs on the front panel and the LCD backlight will illuminate when power is present. If these are not on, check the unit power switch is on. Check the power cable is fully inserted into the PSU. REV 3.0.3 | October 2018 | 13 VERACITY COLDSTORE | CSTORE15-3U QUICK START GUIDE |...
P) Further Information & Resources Further information on COLDSTORE may be found in the COLDSTORE User’s Guide and on the Veracity website. For further information on specific VMS integrations, please refer to the relevant manufacturer or your system supplier.
Need help?
Do you have a question about the Coldstore CSTORE15-3U and is the answer not in the manual?
Questions and answers