Related Manuals for Taco Marine GS-312
Summary of Contents for Taco Marine GS-312
- Page 1 TACO Marine® Grand Slam Center Rigger Mounts GS-312/GS-314 INSTALLATION INSTRUCTION GUIDE ®...
-
Page 2: Kit Contents
NOTE: The maximum hardtop thickness allowable for GS-312 is 2" and for the GS-314 is 4". Handy Tips • The center rigger has no lever to turn, as it is intended only for up and down vertical movement. - Page 3 • Both the GS-312 and GS-314 incorporate a folding • The supplied template is only a guide to help align crank handle. The folding crank handle folds flush with base for true hole positioning.
-
Page 4: Installation
Installation CANVAS TOP IMPORTANT: To mount the GS-312/314 Center Rigger Mount to a canvas top frame, TACO recommends ensuring the necessary extrusion 1. Prepare the canvas for installation by plate is of high-quality material and installed cleaning it. by a reputable welder who can verify the top 2. - Page 5 USING A SOLID PLATE If you are installing through a solid plate already on your boat, please read the following instructions. 1. Locate the AFT end center of your hardtop. 2. Using the included drill template, mark the location of the mounting holes and the 3-1/8" hole cut out onto the hardtop.
- Page 6 GS-3 Bolt Bolt Stainless Washer Stainless Washer Fiber Washer Bolt Fiber Washer Stainless Washer Bolt Fiber Washer Stainless Washer Bolt Fiber Washer Stainless Washer Fiber Washer Spacer Tube Spacer Tube Spacer Tube Spacer Tube Spacer Tube Fiber Washer Fiber Washer Stainless Washer Stainless Washer Fiber Washer...
-
Page 7: How To Clean
312/314 How to use When trolling with a center rigger, you can troll A center rigger can accommodate only one line. it far away from the boat and away from all Center rigger poles 8' to 12' are ideal for boats other outrigger lines. - Page 8 All center riggers (telescoping and fixed) in the extended position are susceptible to breakage while operating the boat at high speeds in rough conditions. TACO Marine Tele-Outriggers are designed for increased durability to ensure a long and useful life. Nonetheless, it is recommended that certain precautions be taken to avoid unnecessary damage.
-
Page 9: Need Support
We’re here to help. Need Support? Contact Us 1.800.653.8568 support@tacomarine.com tacomarine.com 50 NE 179th ST Miami, FL. 33162 @tacomarine @taco_marine ® TACO Marine GS -312/GS -31 4 / 9... - Page 10 LEFT BLANK INTENTIONALLY 1 0 / G S -3 12 /GS -3 1 4...
- Page 11 GS 312 / 314 Drill Template GS-280/2801 Drill TemplaTe Please print at 100 percent for accurate sizing. Slight scaling may still occur. Therefore, before drilling, it is recommended that all template dimensions are measured for accuracy. GS -3 1 2 /GS - 3 1 4 / 1 1...
- Page 12 ®...
Need help?
Do you have a question about the GS-312 and is the answer not in the manual?
Questions and answers