Page 3
Preface Dear client! We want to congratulate on your acquisition of a Schachner central motor – electric kit. We are glad to inform you about operation, maintenance and care of our e-kits on the following pages. You bought a product from Austria which have been technically improved during more than 22 years and is approved in Europe for 10.000 times.
Page 4
1 Inhaltsverzeichnis Inhaltsverzeichnis ............3 Gewährleistung ..Fehler! Textmarke nicht definiert. Lieferumfang ....Fehler! Textmarke nicht definiert. Fahrbetrieb....Fehler! Textmarke nicht definiert. Funktionsbeschreibung: Trittfrequenzsensor....11 Funktionsbeschreibung: Motor ........11 Funktionsbeschreibung: Gepäckträger ......12 Funktionsbeschreibung: Ladegerät .........12 Funktionsbeschreibung: Akku.........13 10 Bedienung und Funktion des LCD-Displays ....Fehler! Textmarke nicht definiert. 11 Der Fahrradbetrieb..Fehler! Textmarke nicht definiert.
Page 5
To avoid faults please read the operating instructions very carefully before putting the e-kit into operation. This kit offers numerous functions which can only be used optimally by using the kit in the right way. This is also important to reach optimal life cycle and distance. When a malfunction occurs, please take the operating instructions, check the cable connections and try to patch the fault.
2 Warranty According to the European warranty- law from 01. January 2002, we grant a legally warranty of 2 years. The warranty period begins from handing over of the kit. Please keep the invoice for time of warranty to proof the purchase, respectively the hand over date.
Page 7
Entitled warranty demands are present, if: - a production- or material fault exists, - the complained damage or fault already existed at the time of hand over to the customer - the damage or the fault causally occurred because of an intended deallocation from Schachner GmbH The warranty includes all necessary spare parts.
3 Scope of supply When you acquire an e-kit from Schachner GmbH, it consists of the following parts: LCD-Display with button-device Throttle grip with connection cable Controller Motor with connection cable Carrier Charger Cadence sensor cable including bracket and magnetic disc ...
Page 9
Assembling schedule Throttle grip with cable Display with Control unit Battery Carrier Controller Cadence sensor Central motor...
4 Driving operation A bicycle, with Schachner e-kit is according to the European draft standard prEN 15197 an “EPAC” (Electically Power Assisted Cycle) also called “pedelec” (pedal electric cycle). The Schachner Pedelec is a bicycle including drive support. It is equipped with an electromotive auxiliary drive with a maximum continuous rating of 250 Watt.
Page 11
You can regulate the assistance of the e-kit also without throttle grip but with pedalling frequency. To do this, please pull out the connector of the throttle grip from the controller and switch on the controller again. The complete power unit is very light and when the motor is turned off, it is totally separated from the bike.
Page 12
5 Function description: Cadence sensor The cadence sensor with the magnetic disc is responsibel for the detection of the cadence. It is plugged in, on the backside of the controller and it is responsible for the limitation of speed according to the European norm project prEN 15194.
Page 13
7 Function description: Carrier The battery is located in the carrier or directly fixed in the frame (depending on the model) and it has a cable which leads to the controller. The lock protects the battery from dropping out of the carrier and from thefts.
Page 14
The charging rate amounts approximately 2 Ampere and the charging voltage 36 V. As soon as the battery is completely loaded the charging will be stopped automatically. – The green lamp on the charger is light. The best time for recharging the battery is at night. So the battery will be fully loaded next morning.
Page 15
The state of charge of the battery you can control on the integrated display on the battery, when you push the red button. The battery is empty if only the red lamp is light. The length of the way you can drive with a full battery charge depends decisive on structure of the way, ambient temperature, head wind, tyre pressure, weight of the driver, age of the battery as well as how often you use the motor and how strong...
Page 16
10 Handling and function of the LCD-display Outlook and function LCD display settings include local time setting, top riding speed setting, metric system / english system setting (MPH and Km/H, Mile and Km), wheel size setting (18—28inch), LCD backlight brightness setting. LCD-display displays battery capacity, time, motor power ratio, riding speed, riding distance, 6Km/h power assist walk, and malfunction code of the electronic control system.
Page 17
The LCD-display is equipped with a seperate control unit which is connected to the display with a cable. In this way the control unit could be mounted either on the left or right side of the handle bar. In this description the –button is named as „Mode“, is „UP“...
Page 18
Choice of Display Unit Press UP or DOWN to choose a display unit (metric / english system). The unit could be MPH and Km/h. The range unit is changing accordingly with the speed unit. Press MODE to save. English system Metric system Wheel size setting Press UP or DOWN to choose a corresponding wheel diameter to...
Page 19
Exit setting In the state of parameter setting, short press MODE to make confirmation. Hold MODE (more than 2 seconds) , save the current setting and exit the setting interface. Normal Operation On / Off Press MODE and the display start to work for the controller power supply.
Page 20
The support levels Starting aid To use starting aid, hold button and turn the throttle grip. The more you turn the throttle grip, the faster the bike will run. The starting aid will support you for 10 seconds, then the motor support is stopped.
Page 21
Activation of the display backlight Hold both UP and MODE for 3 seconds and turn on the display backlight. When the surrounding light is not enough or it is in the evening, you can turn on the backlight. At the same time, the bicycle light is turned on, when it is connected to the light module of the controller.
Page 22
Error code If there is something wrong with the electronic control system, the display will show the error code automatically. The following are some definition of malfunction codes. Value Description Problem with the electricity Problem with the throttle grip Motorcable not connected Problem with motor-sensor Problem with the brakes Communication problem...
Page 23
11 Bicycle operation Put your battery into the carrier, lock it and detract your key- Press the MODE button on the display to switch on the display. The bicycle is ready for driving. To use the starting aid, press button and turn the throttle grip.
12 Disposal The battery needs to be disposed according to the guideline 2006/66/EG from European parliament and council with separate waste and may not be disposed with the normal garbage. As consumer you are legally liable to dispose the old battery- pack according to the regulations.
Page 25
- Project the electric drive unit from moisture. Avoid dropping, spraying and rain water. - Clean all parts of the electric drive unit only with a soft cloth and not with stridently polish and cleaning agents. - Please put charger and battery always on an not flammable base for the time of charging.
14 Error search Problem Possible reason Remedy Electric kit can not Battery is empty Charge battery be switched on. No Battery fuse bro- Check or replace the lamp is shining. fuse Main cable broken Check the main cable ...
Page 27
Charger is Charger broken Test new Charger connected with the No electricity in Check the receptacle battery and a the receptacle receptacle with 230 Volt. No lamp is shining. Charger is Contacts are oxi- Clean the contacts with connected with the dizing contact spray...