BrandMotion SummitView DISP-2003 Installation Instructions

Multi-camera store display

Items Included in the Kit:

DISP-2003

7" Monitor w/ mounting foot for center bolt

Power Supply

(2) 1/2"x13, 1 1/2" Bolts

(4) 1/2"x13 Nuts

(2) 1/4x20, 1 1/2" Screw

(6) #6 3/4 Pan Phillips Tek Screw

(1) Plastic Spacer

(30) SummitView Marketing Brochures

Plastic Pamphlet Holder

Brandmotion Tech Support: (734)-619-1250

SummitView Multi-Camera Store Display

DISP-2003

INSTALLATION INSTRUCTIONS

Tools & Supplies Needed:

Phillips screw driver

Adjustable wrench

Wire strippers

Straight Pick Tool

Electrical Tape

Soldering Iron (optional)

Camera Kits Required:

AVMS-3700/AVMS-3701

(The product system can be easily

removed and mounted to a vehicle at

any point in time)

Page 1/5

Table of Contents

Need help?

Do you have a question about the SummitView DISP-2003 and is the answer not in the manual?

Page 1: Installation Instructions
(6) #6 3/4 Pan Phillips Tek Screw (1) Plastic Spacer (30) SummitView Marketing Brochures Plastic Pamphlet Holder Camera Kits Required: AVMS-3700/AVMS-3701 (The product system can be easily removed and mounted to a vehicle at any point in time) Brandmotion Tech Support: (734)-619-1250 Page 1/5...
Page 2 Locate bolt on exterior of bracket, storage hole. nuts from outside display. two holes in bracket and then tighten to secure slide bracket onto bolts. bracket in place. Brandmotion Tech Support: (734)-619-1250 Page 2/5...
Page 3 5.1- Locate the two large 5.3- Slide harness and 5.2- Attach bracket to mounting holes on either camera through hole, then camera housing. side of the display. fix in place with 2 Tek screws. Brandmotion Tech Support: (734)-619-1250 Page 3/5...
Page 4 6-pin connector. Do not strip brown wire. wires, then secure positive and negative connections. (on power supply, gray dashed line is negative) Brandmotion Tech Support: (734)-619-1250 Page 4/5...
Page 5 Step 6. Installation of harness cover. 8.1- Ensure that power 8.2- Screw bracket to display supply and backup harnesses body. exit the top of the bracket. Slide into place, being careful not to pinch any wires. Brandmotion Tech Support: (734)-619-1250 Page 5/5...