Download Print this page

Regal Grove Gear Ironman 18HE Series Installation, Lubrication And Maintenance Instructions

Advertisement

Quick Links

Ironman E Series
Installation, Lubrication and
Maintenance Instructions
A Regal Brand
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Grove Gear Ironman 18HE Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Regal Grove Gear Ironman 18HE Series

  • Page 1 Ironman E Series Installation, Lubrication and Maintenance Instructions A Regal Brand Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com...
  • Page 2 Important Selection Information Read ALL instructions and safety precautions prior to operating Figure 1 unit. Injury to personnel or unit failure may be caused by improper installation, maintenance, or operation. MOUNTING POSITION FIGURES FOR GROVE GEAR E SERIES REDUCERS Check to verify that the application does not exceed the capacities published in the current catalog.
  • Page 3: General Operation

    General Operation 1. Run the motor which drives the reducer and check the direction of reducer output rotation. Consult motor nameplate for instructions to reverse the direction of rotation. 2. Attaching the load: On direct coupled installations, check shaft and coupling alignment between speed reducer and loading mechanism.
  • Page 4 Approximate Oil Capacities If unit is used in the food or drug industry (including animal food) Grove Gear E Series Reducers consult the petroleum supplier or Grove Gear for recommendations of lubricants which meet the specifications of FDA, USDA and/or Table 1 other authoritative bodies having jurisdiction.
  • Page 5 Operating Positions Hollow Output Protective Cover Normal Speed Reducer positions are shown in the Mounting Position When installing a hollow output protective cover on washdown Figures (refer to Page 2). For special applications, mounting position unit, apply a gasket sealant to the face of the cover to prevent may be inclined.
  • Page 6 Load conditions must be within cataloged ratings published in the current Grove Gear Catalog (available upon request). Published ratings assume lubrication with ISO 460 viscosity grade polyglycol (PAG) oil. Contact Factory for ratings when an alternate lubricant is used. A Regal Brand Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com...

This manual is also suitable for:

Grove gear ironman 24he seriesGrove gear ironman e seriesGrove gear ironman 33he seriesGrove gear ironman 43he series