Pioneer PL-516 KCT Service Manual page 7

P L - 5 1 C i
Tone Arm
(1) Remove the 2 screws from the PU board.
(2) Disconnect the PU lead from the PU board.
(3) Loosen the PU plate screws and remove PU
plates A and B from the arm.
(4) Loosen the allen head set screw fastening the
arm to the stand base. and remove the arm.
Motor
When removing the motor, perform step (5) of
control panel removal.
(1) Disconnect the motor ground wire.
(2) Disconnect the +B cord and E (ground) cord
from the motor control board.
(3) Remove the motor cover.
(4) Remove the motor
mounting screws and
motor control board mounting screws, and
remove the motor and motor control board.
\ A
Allen head set screw
o
a
--\