Subscribe to Our Youtube Channel
Related Manuals for Taco Marine Grand Slam 900
Summary of Contents for Taco Marine Grand Slam 900
- Page 1 TACO Marine® Grand Slam Outrigger Mounts GS-900 Anchor & Stern Light INSTALLATION INSTRUCTION GUIDE ®...
-
Page 2: Kit Contents
KIT CONTENTS Grand Slam 900 mount Required* *not included • SAFETY GLASSES • Light assembly POWER DRILL • SCREW GUN (OPTIONAL) • MASKING TAPE • 1/4" DRILL BIT 32.75" tube • 2-1/2" hOLE SAW • ThREE 1/4-20 FLAT, PhILLIPS hEAD SCREWS* •... - Page 3 GS-900 Thank you for purchasing the TACO Marine Grand Slam 900 Anchor & Stern Light! As a family-owned and operated business since 1959, we take pride in offering the highest-quality, innovative products with excellent customer service. We stand behind our products 100 percent. If you have any questions about this mount or installation, please contact us by visiting tacomarine.com/contactus.
-
Page 4: Installation
INSTALLATION BASE Always use high-quality, stainless-steel hardware when mounting the base. Do not attempt to weld the base to any surface. 1. Verify the Anchor & Stern Light does not interfere with other top-mounted accessories. 2. Using the drill template provided, cut out a 2-1/2" diameter center hole on the top. 3. -
Page 5: How To Use
How to use When boating with the Grand Slam 900 Anchor & Stern Light mount, easily raise and lower the light by turning the crank handle – either clockwise to lift or counterclockwise to lower. For going under bridges, trailering or storage, we recommend lowering the light to ensure it doesn't get damaged. - Page 6 TECHNICAL SPECS ANCHOR & STERN LIGHT Port Blinds are to the rear of centerline Stern Starboard Black Stern Light Light Ground 6 / G S - 9 00 ANC h O R & STE RN L IGh T...
-
Page 7: Product Dimensions
GS-900 PRODUCT DIMENSIONS 1/2” 8 " 1/2” 8 " 35" 1/2” 111° 35" 1/2” .252 THRU 111° .452 X 82° 137° .252 THRU .452 X 82° 137° 4.25 4 " 4.25 4 " 8 " 8 " 8 " 8 " Backing Plate 11"... - Page 8 LEFT BLANK INTENTIONALLY 8 / GS-900 AN ChOR & ST E RN L I G h T...
-
Page 9: Need Support
We’re here to help. Need Support? Contact Us 1.800.653.8568 support@tacomarine.com tacomarine.com 50 NE 179th ST Miami, FL. 33162 @tacomarine @taco_marine TACO Marine ® GS-90 0 ANC hOR & STERN LIG hT / 9... - Page 10 LEFT BLANK INTENTIONALLY 1 0 / GS - 9 00 ANC hOR & STE RN LIG hT...
-
Page 11: Drill Template
GS-900 Drill Template 1/4" Drill 2-1/2" Diameter 1/4" Drill 1/4" DRILL Please print at 100 percent for accurate sizing. Slight scaling may still occur. Therefore, before drilling, it is recommended that all template dimensions be measured for accuracy. G S -9 0 0 AN C h O R & ST ERN LIG hT / 11... - Page 12 ®...
Need help?
Do you have a question about the Grand Slam 900 and is the answer not in the manual?
Questions and answers