Download Print this page

warequip Zallys M12 Quick User Manual

Advertisement

Quick Links

* Warequip accepts no responsibility for equipment that is operated incorrectly, or not in accordance with
operation manuals.
Zallys M12
TOW CAPACITY
Evenly distributed loads as recommended
DO NOT OVERLOAD or obstruct operator view with high loads.
OPERATION
The unit is designed to trail behind the user. The front of
the unit is the tiller head end.
POWER – ON/OFF SWITCH
The Key switch is located on the right hand side of the tiller
post, turn the Key switch to on position for normal operation.
If powered status light flashes there may be a fault, please
contact your supplier.
BATTERY INDICATOR
When fully charged the lights will illuminate to show 100%, as you
use the tug the lights will change to show the level. Once the
charges falls to 40% we recommend charging, a red light will flash
for approximately 10 minutes before the unit loses all charge.
EMERGENCY STOP BACK OFF BUTTON
Stops and repels the unit if activated when reversing.
HORN
To activate the horn, press and hold this button. Release the
button to stop horn.
PADDLE LEVER
When facing the machine; (Forward motion is to the tiller end)
Push lever down for forward motion.
Push lever forward for reverse motion.
The speed is determined by how far you turn the paddle.
The Tug and load should follow behind you when walking.
Quick User Guide
– 1000kg on a level concrete surface

Advertisement

loading

Summary of Contents for warequip Zallys M12

  • Page 1 Quick User Guide * Warequip accepts no responsibility for equipment that is operated incorrectly, or not in accordance with operation manuals. Zallys M12 TOW CAPACITY – 1000kg on a level concrete surface Evenly distributed loads as recommended DO NOT OVERLOAD or obstruct operator view with high loads.
  • Page 2 Quick User Guide Zallys M12 TILLER HEAD ADJUSTMENT To adjust the tiller head up and down use the piston release lever, adjust the tiller to the required height to suit you. M12 BODY ADJUSTMENT To adjust the angle of the body use the lower piston release lever, adjust to the required angle.