Contax M1 Instruction Manual page 91

il
.r""*", ,*,rn .,r"0,
The Power pack P-8 is an external power supply using four 1.5V LR6/AA
batteries or four 1.2V LR6/AA Ni-Cd batteries. This pack allows the camera to
be used with a remote power supply kept in a warm place. This prevents loss of
battery performance due to the influence of cold working conditions.
<Mounting>
I t. loaO the batteries in the Power pack P-8.
I
e Load the three LR6/AA batteries in the battery case included with the
'
Power pack P-B in the indicated direction, then attach the battery case to
the P-8's main unit.
.
@ Place the P-8 main unit inside a jacket (case).
2. Connect the plug at the tip of the P-8 cord to the external power socket.
. When shooting, place the power pack in a warm place to improve warmth retention.
. When replacing the batteries, do not mix different types of batteries or old batteries with
new ones. Replace all four batteries at the same time with new batteries of the same
type.
. When not using the power pack for long periods of time, remove the batteries from the
battery case to prevent leakage of battery fluid.
. Handle the plug to disconnect. Do not pull on the cord.
89
.r+;e***,;*.I-t*, ...ff;.:
..r '
,.t*,*,og^"
..