Download Print this page

Advertisement

Quick Links

BEFORE UNPACKING
READ THIS GUIDE!
This Quick Start Guide 1_1 will show you how to use
the SCAN~LINK Mobile Tag Health Tester v.05
CONTENTS/REQUIREMENTS

Advertisement

loading
Need help?

Need help?

Do you have a question about the Mobile Tag Health Tester and is the answer not in the manual?

Questions and answers

Summary of Contents for SCAN-LINK Mobile Tag Health Tester

  • Page 1: Table Of Contents

    BEFORE UNPACKING READ THIS GUIDE! This Quick Start Guide 1_1 will show you how to use the SCAN~LINK Mobile Tag Health Tester v.05 CONTENTS/REQUIREMENTS PACKAGE CONTENTS PAGE 2 USAGE INSTRUCTIONS PAGE 3 TROUBLESHOOTING PAGE 7 SPECIFICATIONS PAGE 8 LIMITED WARRANTY PAGE 9...
  • Page 2: Package Contents

    PACKAGE CONTENTS: SCAN~LINK Mobile Tag Health Tester with 5V 4A Power Supply and Touchscreen Tablet EQUIPMENT/ MATERIALS REQUIRED: A 120VAC wall outlet  SERIAL NUMBERS (MACs) Write these down now before installing: Mobile THT 00 : 1C : 2C :...
  • Page 3: Usage Instructions

    USAGE INSTRUCTIONS POWER UP Open the case with the handle on the bottom half. The power adapter is stored inside. Plug in the power adapter to the wall, and insert the barrel connector in to the base of the Tester, located between the hinges on the rear of the case.
  • Page 4 SETTINGS By tapping on the gears in the bottom- right corner you will see a settings page. Ensure that both sliders are all the way to the top (set to 63); this should be default. The COM port shown at the top may differ from the one shown in the image to the right.
  • Page 5 When the scan is complete, and if all tags are okay, you should see this: The output screen will indicate the MAC address of the apparel, and how many tags were detected. A piece of apparel will pass if more than 90% of the tags are present.
  • Page 6 This means that (in this case) only 9 of the 14 (64%) tags in the vest are functioning properly, and the vest should not be used. Ensure to re-test a piece of apparel before discarding it, as poor positioning of the apparel can cause erroneous readings. You may move the apparel while scanning to ensure all the tags are within the detection zone above the Tag Health Tester.
  • Page 7: Troubleshooting

    TROUBLESHOOTING ERR: Communications timeout Ensure that the channels are both set to 63 in the settings section. Apparel works fine in the field but the tester doesn’t pass A SCAN~LINK Armour system alarms for the detection of even a single tag. We include many tags (up to fifteen in an orange Surveyor’s vest) to improve redundancy and to cover all angles for optimal detection –...
  • Page 8: Specifications

    Temperature -20°C to +50°C Ambient Range RFID Sensor Radio 902.3 – 927.7 MHz North American unlicensed band Frequency Industry Canada Registered under SCAN-LINK 9283A-SLAU270NB Technologies Inc. Registered under SCAN-LINK FCC ID YUU-SLAU270NB Technologies Inc. Ingress Designed for IP-65 Do NOT immerse...
  • Page 9: Limited Warranty

    LIMITED WARRANTY Manufacturer Limited Warranty and Limitation of Liability Warranty Coverage SCAN~LINK Technologies Inc. (“SCAN~LINK”) warrants to the original end-user purchaser (“Purchaser”) of this SCAN~LINK device (“Device”) that the Device will be free from defects in materials and workmanship and will operate without mechanical failures under normal use, as defined in this Limited Warranty, for a period that commences on the date that the Device was delivered to the vendor who sold the Device (“Dealer”) or delivered to the...
  • Page 10 10. After receiving the Device, if SCAN~LINK determines that the Device is defective and covered under this Limited Warranty, SCAN~LINK may at its absolute and sole discretion: Repair the defective portion of the Device without charge to the Purchaser with new or reconditioned parts; Replace the defective Device without charge to the Purchaser with a comparable new or refurbished device;...
  • Page 11 This document is copyright SCAN~LINK Technologies Inc., 2016. All trademarks property of their respective owners. Current as of August, 2016. SCAN~LINK may have updated documentation which can be located on our website, www.scan-link.com. Tag Health Tester Mobile Quick Start Guide 1_1...