Do you have a question about the Auto Draining Winter Cover and is the answer not in the manual?
Questions and answers
Summary of Contents for EZ DRAIN Auto Draining Winter Cover
Page 1
FOR ABOVEGROUND POOLS If it doesn’t have a continuous barrier then it’s not an EZ Drain! PRE INSTALLATION CHECK LIST Confirm that your pool is compatible with the EZ Drain Winter Cover System (See next page) ITEMS REQUIRED WHERE IT IS PACKED?
Page 2
Ground skimmer you must protect it with a Skimmer Winterizing Plate. 1-1/2” female (This item is sold separately) threads Ball seat Ball Locking ring FOR ABOVEGROUND POOLS If it doesn’t have a continuous barrier then it’s not an EZ Drain!
EZ DRAIN™ WINTER COVER SYSTEM INSTALLATION INSTRUCTIONS ∂ Water Preparation a. Thoroughly clean and vacuum pool prior to adding Winterizing Chemicals. b. Adjust pH to 7.2-7.4 c. Add only winter grade chemicals. Never use chlorine-based chemicals when winterizing. Chlorine vapors will damage your cover.
Page 4
π Install the drain elbow in base of the drain assembly Located under your EZ Drain™ Cover. Use Teflon tape Drain Assembly on threads. Hand tighten only. Drain Elbow ∫ Connect one end of the drain hose to Drain elbow you just installed.
Page 5
Ω Basic Winter Maintenance a. Your new EZ Drain™ winter cover system is designed to reduce maintenance during the winter by automatically removing excess water. Your cover’s continuous barrier will maintain enough water on top of the cover to protect it from wind damage.
Need help?
Do you have a question about the Auto Draining Winter Cover and is the answer not in the manual?
Questions and answers